ffi |
fl |
5m |
4m |
’ |
k |
e |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
$ |
@ |
# |
Æ |
Π|
æ |
œ |
|||||
j |
b |
c |
d |
i |
s |
f |
g |
ff |
9 |
A |
B |
C |
D |
E |
F |
G |
||||||||||
? |
fi |
0 |
||||||||||||||||||||||||
H |
I |
K |
L |
M |
N |
O |
||||||||||||||||||||
 |
||||||||||||||||||||||||||
Earlier topic: [Heidelberg Windmill] metal rollers are heating...
Lay Gauge Slit
Thanks for all the helpful tips.
My surprise present,an Adana 5x3 arrived with the slit for the Lay Gauge dented in on one side.
Any advice as to whether it is possible to straighten this, and how to tackle that would be appreciated.
I am loathe to damage it further, but it would make starting off easier if it were working.
Lay Gauge001009.JPG
Log in to reply