- Browse by category
This is the Elrod that I got from Jim Baker at BayView
Printing in Milwaukee when he retired.
I have a ton of different molds, a couple containers of the
mold oil, manual, plenty of vitaflux, starter strips,
2 1/2 buckets of cutoffs for remelt, all the tools, etc.
The motor has got a new switch/cord and it is fixed
to a platform that has a water inlet built in.
Pickup only in Madison, WI. I have a forktruck and could pop
it into the back of a pickup or something. (the strip cab in the
pics with the starters is not included but might sell
if interested…)
The serial is DR0697
Here are the molds I have:
62-12 – 2pt lead (Twin) – .765 – 4 molds
53-12 – 3pt lead – .765 – 2 molds
56-12 – 6pt slug – .765 – 4 molds
59-02 – 12pt slug (Rect.) – .765 – 3 molds
518-62 – 18pt slug (3hole) – .765 – 1 mold
72-01 – Hairline Center one 2 – 3 molds
72-21 – 1pt side of 2 – 1 mold
73-02 – Hairline center on 3 – 1 mold
74-24 – Hairline Center on 4 – 1 mold
76-44 – Hairline Center on 6 – 1 mold
.9175 high – .854 shoulder
76-55 – Hairline Center on 6 – 3 molds
Tapered body column rule
76-06 – 1pt side of 6 – 3 molds
76-07 – 2pt side of 6 – 3 molds
76-08 – 3pt side of 6 – 2 molds
76-09 – 4pt side of 6 – 1 mold
76-19 – 2-parallel 1pts one 6(side) – 1 mold
76-32 – 2pt with 1/2 pt side of 6 – 2 molds
76-33 – 2pt with 1pt side of 6 – 1 mold
Hoping to get $1200 for it, which is what I paid, but am open. Just
want it to go to a good home.