About mikefrommontana

image: mikefrommontana's picture
Recent content
TitleUpdated
Warnock patent base filler pieces20 May 19
Locking cam for Hammond Saw clamping bar22 Apr 19
Ludlow Cheltenham Oldstyle Condensed5 Sep 15
Quality Letterpress Printing24 May 11
Recent comments
TitleDate ↑
I use kerosene. After cleaning, I...21 Mar
Go on the Internet and look for a...23 Mar
First, find a manual. You can download...15 Apr
First, get a .918 roller setting gauge...30 Jun
I don't belleve that the Craftsman...22 Jul
You have a much later machine than I...26 Nov
I would suspect that you may have your...15 Mar
Yes, the main shaft can break, at least...15 Mar
Well, there's destroyed and destroyed....18 Mar
Hard to tell the value of things....29 Mar
The top photo looks like a Ludlow stick...1 Apr
Yes there is an easier way. First, you...13 Apr
The first press I ran was a motorized 8...2 May
I believe these presses are a direct...2 May
I think that composing a 4 page...5 Aug
It might be a whole lot simpler to find...20 Aug
Please note that there is a difference...22 Aug
The serial number is on the top of the...23 Aug
Figure somewhere around 3000 pounds...28 Aug
parallel_imp is correct that the trucks...12 Sep
The CE Kelly is the English manufacture...21 Oct
Another practical reason for space...27 Oct
My press is set up for 220 volt 3 phase...30 Oct
As long as it's dimensionally flat and...3 Nov
Big single phase motors are expensive...4 Nov
I have a No 3 Old Style and it does...11 Nov
12 Nov
Don't wing it! Presuming you are...12 Nov
So far as I know, ink disks are...14 Nov
Not to be a wet blanket or anything...14 Nov
Trying to mix inks with less than a 1...16 Nov
Is this the first job you ran on this...15 Dec
I suspect the previous messages noted...15 Dec
This press has been doing die-cutting...15 Dec
You can also make your own by buying...18 Dec
Not sure if you want a corner card to...18 Dec
Not sure I would agree with the riggers...18 Dec
What you probably are looking for are...28 Dec
Won't do him much good to send him to...13 Jan
While one certainly can be upset with...14 Jan