About helimited

Recent content

Title	Updated
Seeking Letterpress Partner	22 Jul 18
Paging Inky	29 Dec 11
Miehle Cylinders on Ebay	19 Dec 11
"Perfect Register" Gauge Pins	25 Feb 11
Adast Press: Any feedback? Anyone used it?	9 Jan 11
Photopolymer Platemaking- An introduction	21 Dec 10

Recent comments

Title	Date ↑
Paper is the issue- not the packing- as...	16 Nov
No no, we're talking about PRINTMAKING...	14 Feb
So what's happened with all this? Are...	9 May
No way- there was plenty of letterpress...	13 Aug
I see I see. This makes sense to me...	3 Nov
Ken, If you position the holes...	24 Jan
Hi LG; I'm with parallel. I really...	17 Dec
Personally, in the case of this...	18 Dec
It'd be labor intensive, but.... You...	18 Dec
And there's this on...	18 Dec
You won't see them on here because...	31 Dec
It's not worth anything. I'll give you...	31 Dec
For what it is worth, I have an...	4 Jan
Elizabeth, So you mean if I list 5...	4 Jan
Yeah, I'd concur. It's similar to what...	5 Jan
The letterpress purist will possibly...	6 Jan
No, the other way. The way it...	6 Jan
Don't paint it. Bad idea for above...	7 Jan
My advice? Go buy some oil paint and...	7 Jan
The best way I have found to do it is...	7 Jan
Sounds reasonable as well- but creates...	7 Jan
:faceplam: no, it's incredibly simple....	7 Jan
Well, mike, you about summed it up for...	8 Jan
I did a quick websearch, and it seems...	10 Jan
Powder coating is also a bad idea, I...	11 Jan
(Above post a joke, I dont really...	11 Jan
Is the cylinder Rubber or steel? How...	11 Jan
Hey gerald, I never said you were...	13 Jan
I'd think you'd use Shellac, not that I...	17 Jan
Actually, with regard to wallpaper, a...	19 Jan
^Parallel, good point about the pin...	20 Jan
No it certainly does not, nor for...	20 Jan
You have to go through the step of hand...	23 Jan
If they overlap you should probably run...	24 Jan
No, it's not really worth your time....	28 Jan
"note: although these are an...	28 Jan
Yes, but don't expect any kind of...	29 Jan
Well, your questions leave a lot of...	30 Jan
"wmcveigh: Definition of STATIONERY:...	1 Feb
You're going to have to roll that...	1 Feb