About Finger_Print

image: Finger_Print's picture
Recent content
TitleUpdated
Etching Press used with relief forms5 Apr 19
Kimble Motor-Friction Drive-Making it work.26 Nov 18
Etching press Forums22 Feb 18
Maximum size of Boxcar base for C&P 10x158 Sep 17
C&P NS wavy roller rails7 Jun 17
Recent comments
Title ↑Date
22 Feb
Any wheel that is not steel will always...2 Aug
Appreciate the thought. Hard to read....18 Oct
Appreciate the verification on the...23 Oct
Appreciate the verification on the...23 Oct
Good news in troubled times. Fritz, it...8 Oct
I am going with Bill on the pallet...1 Aug
I can totally see this being used as a...25 Mar
I have seen a similar product at a...30 Aug
I noticed that the first horizontal...3 May
I recently learned that if you use a...4 Apr
I think that I once came across a...16 Dec
I would suggest a split-tone so to keep...22 Aug
In the book "Printing on the Iron...5 Apr
Looks like a surface top for being able...26 Jul
Love it! One should be included with...26 Mar
Me without my pitchfork.5 Jun
Mike, Just checking in to see how...6 Jun
My first press was an offset web. Built...22 Feb
My main take away from your comments...11 Sep
My wife will be working in the...11 Sep
Next addition could be an oscillating...23 Jul
Not a Heidelberg person, but that looks...23 Oct
Same problem here.15 Nov
Seems as though I remember reading...5 Apr
So, I noticed on photo 5609 that it has...24 Jul
Thank you everyone for the great...8 Apr
Thank you for all of the feedback....9 Jun
Thank you for answering the "Stones"...26 Jun
Thank you for the suggestions. 23 Feb
Try to use a case builder that has...13 Sep
Try to use a case builder that has...13 Sep
Unless I am missing something, (as a...29 Mar
You may find an inexpensive pair of...6 Nov
You may go to your local hvac or...10 Jul
"I still have to give my old motor a...5 Jun
" You must cure the cause and heal the...9 Jun