About Finger_Print

image: Finger_Print's picture
Recent content
TitleUpdated
Etching Press used with relief forms5 Apr 19
Kimble Motor-Friction Drive-Making it work.26 Nov 18
Etching press Forums22 Feb 18
Maximum size of Boxcar base for C&P 10x158 Sep 17
C&P NS wavy roller rails7 Jun 17
Recent comments
Title ↓Date
" You must cure the cause and heal the...9 Jun
"I still have to give my old motor a...5 Jun
You may go to your local hvac or...10 Jul
You may find an inexpensive pair of...6 Nov
Unless I am missing something, (as a...29 Mar
Try to use a case builder that has...13 Sep
Try to use a case builder that has...13 Sep
Thank you for the suggestions. 23 Feb
Thank you for answering the "Stones"...26 Jun
Thank you for all of the feedback....9 Jun
Thank you everyone for the great...8 Apr
So, I noticed on photo 5609 that it has...24 Jul
Seems as though I remember reading...5 Apr
Same problem here.15 Nov
Not a Heidelberg person, but that looks...23 Oct
Next addition could be an oscillating...23 Jul
My wife will be working in the...11 Sep
My main take away from your comments...11 Sep
My first press was an offset web. Built...22 Feb
Mike, Just checking in to see how...6 Jun
Me without my pitchfork.5 Jun
Love it! One should be included with...26 Mar
Looks like a surface top for being able...26 Jul
In the book "Printing on the Iron...5 Apr
I would suggest a split-tone so to keep...22 Aug
I think that I once came across a...16 Dec
I recently learned that if you use a...4 Apr
I noticed that the first horizontal...3 May
I have seen a similar product at a...30 Aug
I can totally see this being used as a...25 Mar
I am going with Bill on the pallet...1 Aug
Good news in troubled times. Fritz, it...8 Oct
Appreciate the verification on the...23 Oct
Appreciate the verification on the...23 Oct
Appreciate the thought. Hard to read....18 Oct
Any wheel that is not steel will always...2 Aug
22 Feb