About western411

Recent content

Title	Updated
Windmill wont turn on	17 Feb 24
Deep Relief base	21 Nov 23
Change V belt	17 Aug 23
Foil Setup	22 Jun 23
Foil Setup	22 Jun 23
Foil Setup	22 Jun 23
Embossing	22 Mar 22
Embossing - What If...	27 Jul 21
Embossing	24 Jul 21
Die Cutting Plate	14 Nov 20

Recent comments

Title ↓	Date
You say "picture and not text" If that...	5 Dec
You say picking up to deep which does...	27 Mar
You might try cutting a 2-3 inch tall...	10 May
You mention sheet steadiers and I am...	21 Oct
You mention embossing but then it...	5 Jul
You have good feedback so far from some...	15 Jun
You have good answers above. It does...	2 Nov
You got some good information. You did...	9 Oct
You do need to adjust the rails...	23 Jul
You can use tack reducer. A little can...	8 Nov
You can try Bijan but I am not sure if...	4 Aug
WOW - BIG THANKS (screaming thank you...	11 Mar
With the power turned OFF move around...	31 Dec
With the larger sheet we did have more...	8 Dec
With letterpress you are generally...	18 Aug
Whittenburg sells them complete I think	18 Jun
When ericm said heat I thought we meant...	14 Dec
What they said and a few more. The top...	5 Feb
What they said above. Also cutting die...	18 Aug
Well the grippers came with the press 5...	16 May
We will check with our die makers. We...	3 Apr
We use Express Die. They do a great...	17 Jul
We use Advance Roller in Corona...	9 Aug
We use Advance Roller in Corona...	9 Aug
We use Advance Roller in Corona...	9 Aug
We use Advance Roller in Corona...	9 Aug
We thought about the varnish and some...	11 Jul
We switched over and gripped the 5.5...	4 Oct
We replaced the shear collar and have...	21 Mar
We replaced the shear collar and have...	21 Mar
We ran an oversized sheet, taller...	30 Jan
We pulled the old shear collar today....	10 Mar
We printed a foil label on black stock....	24 Dec
We have used the same tape we use for...	1 Nov
We have used the 3M for small runs but...	30 Jul
We have run test rolls and get a little...	5 May
We have not had a noticeable change in...	6 Mar
We have duplexed stock both printed and...	10 Feb
We have been using a newer chipboard...	8 Jul
We have a redball windmill now. Based...	29 Aug