About TollundPress

Recent content

Title	Updated
Heidelberg GT roller bearings (4 types)	11 Jan 24
Windmill Part Identification - Bent Knee + Foot	16 Nov 23
Heidelberg GT - Impression Strength	26 Jun 23
Heidelberg GT gripper height off platen + packing	25 Jun 23
Heidelberg GT Parts Book - Hi-Res Illustrations	18 Jun 23
Issue with Heidelberg GT gripper pick-up from...	6 May 23
Platen Jammed Shut on Heidelberg GT	23 Apr 23
Heidelberg GT Parts Swap	16 Feb 23
Windmill GT Parts Swap	28 Jan 23
Obtaining position/register w/ deckled paper on...	24 Dec 22

Recent comments

Title	Date ↑
Have you considered Evapo-rust? I have...	17 Apr
I realize now that the roller image...	27 Apr
Just in case anyone had the same issue...	17 May
In case someone encountered the same...	17 May
Ah, very good points everyone! Thanks a...	13 Jun
Oh sorry - of course I should probably...	14 Jun
Thanks! It’s on backorder at NA...	14 Jun
I’m going to use the tagboard until...	17 Jun
I’m going to use the tagboard until...	17 Jun
Ha ha, yes! I believe that that the...	28 Jul
The only reason I’m mentioning the...	28 Jul
Hi Nick, I actually meant to write...	2 Aug
Hi Ted, I did the first cycle off...	23 Aug
I checked the roller height and it...	23 Aug
Hey Nipi I’m actually working on...	23 Aug
Half (1/2) is not an option on the GT...	24 Aug
Hi Frank, Thanks for your thoughts....	24 Aug
@James Bourland - ha, yes - good...	24 Aug
@jhenry Thanks. Does that apply even...	24 Aug
I think I might have figured out what...	24 Aug
@Michael… thanks - ok, wasn’t...	24 Aug
@bppayne I fear you might be right but...	24 Aug
@Frank Thanks for that! Now you’ve...	25 Aug
Boy, that IS beautiful! Thanks for...	26 Aug
Hi, Be careful! Your best move...	28 Sep
This is a steel plate that is screwed...	22 Mar
I do have the manual and the parts list...	23 Mar
Huh! That's really interesting. My...	25 Mar
Just to follow up on this old thread -...	1 Apr
It’s not a die cutting jacket as...	2 Apr
That’s the issue. You can’t see it...	5 Apr
Hi Nipi Just sent you a DM... email...	13 Nov
Hi everyone, Okay, even as they're...	15 Nov
Hi everyone, Okay, even as they're...	15 Nov
Glad you liked it... I'm updating and...	19 Nov
Wow! Thanks for that clip! Apart from...	18 Dec
Thanks everyone... yes, it's going to...	28 Dec
Sorry, everyone - for some reason my...	28 Dec
@bppayne I actually have the swingaway...	8 Jan
Gauge pin material: Just found the wire...	12 Jan