About andykeck

image: andykeck's picture
Recent content
TitleUpdated
Intertype Model C and related gear31 Mar 14
Equipment moving help in the Portland, OR area14 Jun 07
Recent comments
Title ↑Date
> As andykeck said, metallic ink will...25 Jan
>Good advice from Inky, after all his...7 May
>My typography instructor from RIT is...6 Jan
>My understanding is that monotype type...6 Nov
>...that sells original manuals for the...17 Sep
According to this...15 Dec
Any case anyone else stumbles across...6 Mar
Are you down in Burien? If so, I've...16 Apr
As the owner of a nearly identical...11 Oct
Blatchford and Dutch Boy both were...12 Apr
Do you have access to a densitometer? I...27 Dec
For the record, I had a not too...16 Feb
For what it's worth, the practice of...20 Jan
Here's a link to a few photos of the...10 Aug
I always just wear coveralls....17 Oct
I count nine inking rollers. Just did a...28 Feb
I did my part! I gave my Kluge to...7 May
I got mine from Dale (dcshop1001 on...30 May
I got my pump rebuild kit from Dale...24 Feb
I got sidetracked by some stuff that...28 Nov
I haven't bought the kit yet as the...7 Nov
I hope I didn't come off sounding...16 Apr
I used to babysit a 330 back in the...25 Jun
I was fortunate enough to find a roller...10 Aug
If you've done it right, they can...22 May
IMO, on uncoated stocks, metallic ink...24 Jan
It was just fine. As I recall it's just...31 May
It's been a long time since I used to...6 Oct
It's been a long time since I used to...6 Oct
I'll take some photos this evening and...10 Aug
I'm in the same boat as Lead Graffiti....7 May
I'm with modernman here. A well...22 Mar
Let's see. First, I'd look _real hard_...14 Nov
My Kluge is old enough that there are...1 Jun
Rebuild kits are often available on...7 Nov
Sorry. It's been 17 years since I last...6 Oct
That's the same kit I bought a couple...11 Dec
There are Kluge manuals at...28 Feb
To lever up the press to get rollers or...24 Jan
To lever up the press to get rollers or...24 Jan