About CPierson

image: CPierson's picture
Recent content
TitleUpdated
The Purple Raven Printery28 Nov 18
Kluge on Craigslist19 Aug 10
First print on new C&P & Kelsey ink29 Jul 10
C&P share and Challenge proof press blanket...5 Jul 10
What is it?7 Jun 10
Mystery type6 Jun 10
large disc gear5 Jun 10
Multigraph help23 May 10
Sigwalt Ideal 5 restoration8 Sep 08
Sigwalt Ideal 5 chase27 Aug 08
Recent comments
TitleDate ↑
I know your pain. I recently purchased...29 May
Thank you for the info. Now at least I...26 Aug
Thanks so much gillyfish! I'll put out...26 Aug
I really like Charbonelle also....28 Aug
As a person who frequents Briar Press...29 Aug
Thanks! This was a great project. There...9 Sep
Lynn, On the pins you are talking...13 Sep
Congratulations on such a wonderful...13 Sep
Hi Lynn, I did end up getting a...14 Sep
Hi Lynn, Not on the end but near the...15 Sep
It also looks very much like my S&L...11 Mar
Hi, I have a Shniedewend & Lee Old...13 Mar
Ok, might not be totally relevant but...13 Mar
Could be injet printed first. Then the...22 Mar
Hi jhenry, I went to that link and...24 May
Hi, Dave, Thanks! A PDF would be...31 May
What I don't understand is why all of a...6 Jun
Thank you!7 Jun
This looks like an old style press with...7 Jun
Thanks dickg. Interesting thing...10 Jun
I think I have one of these C&P presses...21 Jun
Hi Bob, So, if my rollers are 1.615...21 Jun
Mike & Bob, Fascinating (said in the...21 Jun
Working under pressure is one thing but...21 Jun
I have tried this sort of thing and...21 Jun
Vrooom, I'm not thinking low rails...21 Jun
I do hope you'll post the finished...21 Jun
I love that!22 Jun
That sound like a fabulous thing! What...22 Jun
Thank you Gerald :)22 Jun
I found this website when I was...25 Jun
I'm sorry I can't be of any help but I...30 Jun
How about nylon washers?1 Jul
Thanks! I think I even have some extra...6 Jul
On History Detectives they visited...24 Jul
My 8 x 12 C&P press all the way open is...25 Jul
I am not being a facetious here. Maybe...25 Jul
Barbara I saw Inception today. I...25 Jul
When you are talking a quick 3D...26 Jul
Probably about 4 inches less. Then you...26 Jul