About ericm

image: ericm's picture
  • Member for 16 years 19 weeks.
  • Last access 11 weeks 6 days ago.
Recent content
TitleUpdated
Kluge foil shop closing14 Sep 22
leaving ink on windmill system12 Jun 22
Numbering Machine repair5 Jun 22
Locing up your die cut12 Feb 22
Largest numbering machines29 Jan 22
edge gilding with foil9 May 21
Kluge "No-Name Clutch"11 Feb 20
copper die for printing28 Oct 19
NCIS Los Angles15 Jun 19
mid 70's Triumph Paper Cutter switch23 Feb 19
Recent comments
TitleDate ↑
parts you need are easy to make. the...4 Jun
any local die cutting die maker would...4 Jun
a fully loaded kluge with both foil and...4 Jun
BTW beamond, give DBurnette a price on...4 Jun
mohotravelers is correct in that the...5 Jun
why ask such a stupid question in the...11 Jun
i would not recommend welding this...17 Jun
i think there is a rod that all that...17 Jun
andykeck's pics show the factory tool...12 Aug
please make SURE you have installed the...12 Aug
don't put your hands where machine is...12 Aug
once you do get the correct key, pack...8 Oct
your "makeready" is simply eliminating...8 Oct
you can buy straight scoring and...8 Oct
google : duploflo ...great 2 sided...13 Oct
you can go with a mechanical drive...13 Oct
tow truck guys aren't always the best...13 Oct
http://www.briarpress.org/1467 there...29 Oct
the top of the pump (crank shaft end)...17 Nov
flushing, as S. Pekala as stated is an...28 Nov
is your speed control the old box with...17 Dec
something you might try... you will...7 Jan
does this press have the...12 Jan
first off, do you have a press that...13 Jan
i do this for a living and would be...14 Jan
i have responded in your other post14 Jan
Have to side with jhenry on this one. I...21 Jan
you need to find out if the motor is...21 Jan
make sure your variable speed pulley is...21 Jan
your belt size is 107 inches...21 Jan
in my experiance, i fought back with "...22 Jan
pardon my vagueness but, the BEST...24 Jan
it looks like the site in the link...24 Jan
make SURE to look up the earlier post...24 Jan
Winking Cat, I stand "technicaly...24 Jan
hmmmm... maybe try using a very...28 Jan
if you can post serial number of press...28 Jan
you are inking on a press with...29 Jan
you can either polish the elevated...1 Feb
sorry bout not getting back to you......3 Feb