About chopsockey

image: chopsockey's picture
Recent content
TitleUpdated
Cracked Ink Disk Lever28 Nov 11
Adding a treadle to a C&P 8x12 NS8 Nov 11
Need Help Reviving a C&P Pilot28 Oct 11
Golding Pearl No. 3 (or similar) to buy or trade27 Oct 11
Pilot VS. Sigwalt tabletop presses11 Oct 11
My motor died! help...19 Jul 09
Printing on fabric13 Feb 09
Studio space to share in Chicago suburbs13 Feb 09
Press moving help20 Jan 09
Question about trucks31 Dec 08
Recent comments
Title ↑Date
@wildmark i read that thread...28 Oct
dennis, i checked out the baldor site....19 Jul
Does anyone know of anyone in the...31 Dec
For others in Chicago area, I do...18 Dec
Grayslake... So it is a bit further...13 Feb
halfpenny... do you have any tips...17 Sep
I am assuming this would be the same...5 Jul
I am awfully surprised you aren't...29 Dec
I do a search for bamboo paper and this...1 Jan
I got it. Thanks. I think it will be...21 Jan
i guess i was just concerned about...28 Oct
i have passed on several presses...29 Oct
I hope a product comes out soon... I...7 Jun
I just selected 10 as a number in case...7 Dec
I made out well on Ebay years ago and...6 Nov
I printed on my C&P 8x12 until I was...11 Nov
I thought that might be the way.... I...5 Jun
I use the crane's lettra 300gsm paper...22 Jan
I will hopefully be acquiring a...30 Sep
If he is just manually turning the...24 Oct
john... where did you get this...6 Jul
Just bumping this post... Has anyone...20 Sep
just bumping this... would like to see...23 Nov
Lots of good information that will take...28 Sep
loving this thread! i just had to say...19 Jan
Oh yes... Paul actually moved my press...20 Jan
okay... i found a bad photo that i had...8 Nov
papers that I have used for postcards...17 May
Perhaps I am confused... If you lay...30 Sep
Please don't assume that any person new...23 Apr
quite a testy group. (i have the...31 Dec
right now they are metal but do not...1 Jan
Smock (aka the folks at Boxcar Press)...5 Jun
so it sounds like it is doable. just a...20 Jan
thanks dennis! i will check those...19 Jul
Thanks Dick... I will try that first....8 Jul
thanks everyone. i do have a few...20 Jul
Thanks for the info. I would love a...18 Oct
thanks for the tips. Can you suggest...29 Dec
thanks. i think i will just replace...1 Jan