About BillWhitley

image: BillWhitley's picture
Recent content
TitleUpdated
"K" pin mark identification24 Feb 20
L. Johnson & Co, Philadelphia 21 Jan 20
Typeface ID help needed12 Jan 20
Looking for sorts: Medieval (Goudy) 14pt.3 Nov 18
C&P Craftsman parts, electric motors 27 Sep 17
8x12 C&P NS treadle drive shaft28 Aug 17
Want to run a newspaper in Vermont?13 Jun 16
Pandemonium Press13 Aug 13
Recent comments
TitleDate ↑
For long-distance moves I used to...9 Mar
Hi Sam, Please contact me about...27 Mar
And it would appear to be Goudy (Old...9 Mar
Hi John, I have one (#7638), and...30 Mar
John, I would be very happy to have...1 Apr
I have one - it's a 6x9 chase size, and...14 May
Hi Clothdog, Hope these are helpful...14 May
Clothdog, The gripper fingers are...15 May
Kate, Since you're in NJ - suggest...19 May
John's pricing is fair - that is to say...19 May
Kelseys range from a (roughly...23 May
There's still the Printing Arts Fair at...27 May
Closer to home, there is the ARM in NYC...28 May
Shelly, So did you lower the blade...30 May
Elysse, Good find! 1. Yes - you...3 Jun
Looks like a Golding, which at one time...10 Jun
Impressive failure - if you can find...14 Jun
Suggest you read David Rose's excellent...19 Jun
Sound like you're describing the...19 Jun
It is a "sign machine", of the type...23 Jun
Like Gaslight-Daze said - pipe rollers...26 Jul
Calm down - some idiot has obviously...7 Aug
One note - from the photo, it appears...10 Aug
The trucks should align with the axis...14 Aug
Sorry - copy & paste error - meant to...14 Aug
Hi Heather, There is a section on...14 Aug
Since you live in VT, you have a good...15 Aug
I suggest you go for the "replacement"...26 Aug
Briefly: I'd suggest using an...13 Sep
Here is a measured drawing of the...15 Sep
Sounds like an inexperienced...1 Oct
Isn't there supposed to be a small...4 Oct
I understood that the red press was...5 Oct
Heat is good. I have a press shed in my...7 Oct
This is a "copy press", but it was...12 Nov
In the later 1990's, I bought a...28 Nov
Vandercooks have increased quite a bit...30 Nov
Nikita, By all means, please go to...19 Dec
If you are looking to get into...31 Dec
This is a C&P "New Series" (made after...9 Jan