About rroddi

image: rroddi's picture
Recent content
TitleUpdated
bikkie16 Apr 10
assistance16 Apr 10
Recent comments
Title ↑Date
all h/platen rollers are...13 May
All packing on a cylinder press should...19 Sep
All rollers on your platen should be...2 Jul
All rollers on your press are the same...6 Dec
All rollers should be the same size...22 Sep
Are there any letterpress print shops...8 Jan
Basic clamshell platen practice, if...28 Jul
Before I retired the company I worked...15 Mar
Have a think about laying down your...2 Oct
having read the three comments so far...15 Jan
Hi Chuck, take of the jacket and with a...17 Feb
hi courtney firstly do not use gasoline...10 Feb
hi courtney,i am a fit and active 69...11 Feb
Hi, just a quick tip from an oldie, in...25 Sep
Hi, just a quick tip from an oldie, in...25 Sep
Hya Lysbon give Coates a try they used...22 Aug
hya toddmi ran a windmill for many...6 Mar
I have often cut plastic film on a...24 Apr
I have run millions during my 40 years...25 Mar
I live in Queensland and maybe I can...11 Jul
I ran an Heidelberg two colour cylinder...29 Mar
I ran Heidelberg cylinders for many...9 Jun
I ran Hidies commercially for many...19 Jul
I ran one for many years on & off used...2 Dec
I ran one of these circ 1959-60 I did a...27 Dec
I ran those presses for many years and...17 Nov
i sit here amazed to read about all the...29 May
I take it that you are using brass...7 Jan
I used to have a special tool. It was...4 Apr
If you are only doing short runs, 4,000...15 Apr
in days gone by comps used to put a few...11 Oct
In the late fifties I ran a ce Kelly...12 Oct
is your forme type high17 Dec
It is also called Turps in O.Z. which...6 Jul
It's a slug cutter19 Dec
lease try [email protected]15 Jul
lease try [email protected]15 Jul
Many moons ago when I was an apprentice...25 Jan
on most redballs there is a slot on the...12 Apr
On the base of the pump on my platen...20 Jul