About linegauge

Recent content

Title	Updated
Aluminum and resalite furniture	17 Apr 20
Anyone need a few Ludlows and a ton of mats?	28 Feb 18
Schmidt Graphic Equipment, Inc.	10 Nov 14
Dried and stubborn ink remover	14 Mar 11
Watch the classified ads	26 May 10
Furniture	5 May 09
Backup plates?	5 May 09

Recent comments

Title ↓	Date
"Some motors are dual voltage. You have...	11 Nov
You would be better served widening the...	4 May
You need to take the flywheel to a...	4 Jan
You need to run a small amount of type...	28 Feb
You must have a very dry bearing in the...	8 Mar
You may have "composition" rollers....	2 Jun
You are right Bern. I absolutely got it...	2 Oct
You are either over packed or the...	4 Jul
With the platen back as for loading...	31 Jul
Windmills are meant to be leveled at...	10 Mar
Why not just use the lay gauges as they...	23 Dec
When the gripper bar is at the 6...	28 May
When I install Windmills, I use thin...	6 Dec
What type of ink are you all using? I...	14 Apr
What are the dimensions? I may have...	3 Jun
Try Unisource or any paper house in...	21 May
Try adjusting the top and bottom...	28 Feb
They are .890" without plates. Several...	11 May
There is a product called MicroCut. It...	29 Jun
There are two tools that are used in...	23 Mar
The truck diameter looks to be larger...	15 Apr
The net weight of a 10 x 15 Windmill is...	8 Oct
That stuff is part of an old Kluge Head...	7 Nov
Take the top off of the tank and see if...	6 Apr
Sounds like you have "composition...	5 Oct
Sounds like a chase fell out or...	6 Jul
Should be inside the electrical door on...	10 May
See if there is someone that does dry...	10 Apr
See if there is an oil pump on the back...	14 May
Remember, these are well built...	3 Oct
Recycle them. Remove any of the other...	23 Nov
Post a photo. I don't recall any...	25 Aug
Parts can be obtained from Whttenburg...	13 Jul
Pamarco here in Atlanta just made a set...	13 Dec
One more suggestion, have a mechanic...	27 May
OK, sobre o compartimento sob a...	30 Oct
OK, about the compartment under the...	28 Oct
OK saw the video. are you sure your...	24 Jan
Oh yes, don't you cook in a "galley"?...	4 Nov
No reason for it to heat up at all. Be...	14 Aug