About drorange

Recent content

Title	Updated
Windmill 10x15 foil unit	5 Nov 11
Chipboard kills my blade	7 Jun 11
Paper Cutter Disassembly - Challenge 305	1 May 11
Keeping Hands Clean	19 Apr 11
ATF Badge, Dating 12x18" C&P	20 Aug 10
Folding at a Perf	29 Apr 10

Recent comments

Title	Date ↑
This is a great website, and no one has...	23 Apr
I can't see why you would refuse to...	23 Apr
Wedding invitation customers can be...	23 Apr
Those American Coaster Co. coasters...	23 Apr
I have seen paper like this at the...	23 Apr
I use a a three-way mix of kerosene...	28 Apr
I was able to insure my Windmills, my...	28 Apr
I'm going to jump on the giving away...	2 May
We have one of these, and I survived...	3 May
Naptha is dangerous dangerous dangerous...	8 May
The vegetable oil is definitely...	9 May
I got the same e-mail! Then I did a...	9 May
Have you watched to see if your sheet...	10 May
I would definitely vote for looking for...	11 May
I thought maybe clear spraypaint would...	2 Aug
Home depot paint chips! Po' mans...	2 Aug
I have to say, it definitely has the...	9 Aug
Those Syn-Tac rollers work great for...	17 Aug
I think have two Goldenrod pump oilers....	23 Aug
It looks like it's missing the cover...	25 Aug
I think you'd have to be a bit of a...	28 Aug
I've printed on Basswood with my C&P....	30 Aug
By the way, I was using an mag die...	30 Aug
By the way, I was using an mag die...	30 Aug
The wood is junk. You can get them...	21 Sep
I believe the panel is indicating that...	26 Sep
Important note: I AM MOSTLY A MORON. I...	26 Sep
Hmm. 100. Maybe $20 each, so they'll...	27 Sep
I think you could look at these at-home...	28 Sep
That stuff makes such a mess. Not into...	28 Sep
I have a Challenge 265 and this is my...	28 Sep
You wanna share it with me, too? I need...	29 Sep
Jeeeez. You sound like a real fun kind...	8 Nov
Ok I'm ready to pitch out a...	24 Jan
Our solution was a big Agfa...	8 Apr
Looks to me like the stock was mangled...	22 Apr
Well, too late! Luckily this is the...	5 May
I tried printing a piece of leather on...	5 May
Second vote for S.I. Industries. They...	6 May
These are juuunnnk. I bought one of...	26 May