About jhenry

image: jhenry's picture
Recent content
TitleUpdated
Cedar Creek Press22 Feb 24
Why did Challenge number their wedge quoins?9 Aug 21
Looking for Newspage Mats24 Oct 16
letterpress lollipops?30 Mar 15
Parts Press7 Apr 14
Bindery Press?6 May 13
Black Ball Pilot8 Aug 12
Cotton Fiber Paper - Why?16 Jul 12
Ink Brands Used for Letterpress19 Jun 12
Needed a few lines of 16pt. Garamond Ludlow or...9 Jan 12
Recent comments
TitleDate ↓
Are you looking for a single cavity...30 Mar
Sorry about the orientation of the...8 Aug
Here are a couple photos taken at the...8 Aug
Sasha: It appears you have your...8 Aug
can you manually depress the plunger...5 Aug
I owned one of these (a 10x15) many...3 Aug
Make certain the press is firmly...17 May
The serial number is hidden under the...24 Feb
There are quite a few ways to handle...28 Dec
I've had good success with making...14 Oct
It looks like you'd have to have a much...6 Jun
They may have been used to apply foot...23 Apr
It looks like Modern Lining Antique, a...5 Apr
I agree with bppayne you should have no...21 Mar
Having swapped a Craftsmen lever for a...11 Mar
That's a large part to have worn out or...11 Mar
I'd agree with Bob. Dampening slightly...8 Mar
I'm not certain this applies to your...19 Jan
Sarah: I think it is likely that the...14 Jan
It would be rare to have a granite...13 Jan
If anyone is looking for similar BSW...8 Jan
The press is set up for diecutting and...16 Dec
I have used artist oils to add tints or...3 Dec
Perhaps you could use and adjustable...17 Nov
I have used heavy kraft paper as well...2 Nov
The problem may well be in the pump...29 Oct
Careful makeready can help get the...19 Oct
I have a manual for the Miehle Vertical...13 Oct
The pawl is manually held in place as...28 Sep
Whenever the press is engaged, the...24 Aug
By the way, does anyone need some wedge...9 Aug
The roller trucks should be the same...23 Jul
If you use a soft "cushy" paper as is...21 Jul
Use a minimum amount of ink to get the...9 Jun
Frank: I have an older Epson XP-600...18 May
I have good success with an Epson...15 May
If the paper has a good deal of surface...29 Apr
Your reference to Gamblin makes me...8 Mar
My lockup bar is the newer style, but...8 Feb
I owned a 12x18 Craftsman C&P with a...4 Feb