About danielheff

Recent content

Title	Updated
Heidelberg 10x15 Windmill	9 Nov 17
Clove St Press	21 May 17
Removing Windmill frisket holder	5 Feb 16
Heidelberg Foil puller	1 Oct 15
Side guide and gripper timing - Heidelberg Platen	29 Jul 15
Duplexing paper, what to squeeze it with?	24 Sep 14
Machining 10x15 ink fountain	26 Jun 14
Heidelberg - rollers or runners problem?	8 Apr 14
Windmill gripper alignment	10 Jan 14
Adding foil unit to windmill	21 Dec 13

Recent comments

Title ↓	Date
Your solution is in your last sentence...	14 Dec
You could hit it with opaque white and...	24 Jul
You can just remove the handle and work...	12 Apr
You are ranting about technology...	28 May
Yes, on and off impression. It doesn't...	14 Jan
Yes, Boxcars bases aren't the old-timey...	1 Oct
yep, print and flip for me. Unless it's...	4 Sep
Yep Denny is great... On my proof...	30 Jan
With the overlap shown in the upper...	6 Sep
wish you guys were in san diego. I...	26 Jun
While on the topic of roller gears, my...	22 Jun
When I started I used Owosso also for...	1 Nov
What you have there, is a typewriter....	5 Jun
What happens when you rotate the form...	13 Jan
What did you end up using for...	11 Oct
Were the holes all the way through the...	7 Jan
Well, were you given it for free or did...	17 Jan
...	14 Jan
Use dial calipers, check the rollers...	6 Aug
Unfortunately still haven't solved this...	7 Jul
Thought I'd share my successful venture...	13 Mar
This stock that I am referring to...	20 Feb
This maple is definitely cured. Its as...	21 Sep
This is what CrownFlexo has been doing...	19 Jan
The sound is definitely originating...	14 Jan
The problem was solved back in august...	16 Mar
The original seller organized the...	18 Aug
The original model that I posted is...	21 Sep
The delivery jogger only works when...	4 Oct
The bald spot you mention is because...	31 Aug
That's a good ballpark price. Location...	11 Jul
Thats an interesting setup....	28 Mar
That is a little fast. By timing that...	24 Mar
That is a great idea Geoffrey...	18 Jun
That blue looks beautiful!	21 Sep
Thanks for the advice guys. In case...	20 Jun
Thank you guys for the great...	27 Jun
Take all your packing off, advance the...	5 Sep
Sounds like your impression bearings...	20 Oct
So what I've found is that the rear...	12 Jun