About Peter Luckhurst

Recent content

Title	Updated
Machine minder / machine manager / printer	15 Jun 12
Assayer in the uk ?	17 May 12
Windmill wash up unit	6 Feb 12
What is a dingbat ?	29 Dec 11
a hint	6 Nov 11

Recent comments

Title ↓	Date
|nferno , you have a point re wear in...	20 Feb
\i never got into the tyesetting and...	6 Jan
\i dont like to run machines that have...	22 Mar
Yours may also need some oil too ...	12 Feb
Your two photos point more toward inker...	26 Jun
Your trucks should only be the same...	3 Jun
Your top photo ,upper image ,actually...	17 Jul
Your tacky forme is holding the sheet...	7 Nov
Your roller came to you in this fashion...	11 Nov
Your question is answered thus , where...	28 Jul
Your noise is cyclic in time with the...	2 May
your feed board should be deep enough...	20 Mar
Your cool black, does it have letters...	9 Jul
Your collar can be blown and still...	2 Jul
You would get the right answer if you...	15 Oct
You wont likely find the long bar bent...	9 Feb
you wont jump a tooth on both sides at...	6 Jan
You will likely find the spikes along...	17 Feb
You will find in the tool box if lucky...	6 Sep
You will be better off ringing a few...	8 Apr
You will be able to source one from...	3 Jul
You want the machine to stop definately...	19 Feb
You understand ... I cant remember...	11 Nov
You test glue a pair of strips to one...	1 Feb
You still have your typing fingers then...	6 Mar
You still have to wipe over after but...	22 Jan
you should not need to take a hammer to...	21 Sep
You should have a manual or operators...	12 Mar
You should be able to find second hand...	8 Jul
You put the spring on easily it is as...	27 Jan
You need to watch how the belt sits all...	31 Mar
you need the headboard front seperator...	11 Feb
you may find the shim as mentioned by...	12 Jan
You may find that there are actually...	16 Jan
you may deny it but your rollers are...	10 Jul
you may also look to see if you have...	16 Nov
you may also find opening one off the...	12 Feb
You make sense of that because i have...	21 Nov
you just undo the bolt on its fixing...	16 Jun
You have to run with some guide on the...	26 Feb