About Luke

image: Luke's picture
Recent content
TitleUpdated
What is this?8 May 13
C&P extra parts?25 Mar 13
Press ID? WA state4 Feb 13
C&P parts wanted3 Jan 13
Recent comments
TitleDate ↑
Eastside Saw does a great job. I...24 Jan
Has anyone simply bought 7/8" mic6 AL...7 Feb
Evan, I was just curious about this...8 Feb
There's a rocker on ebay right...20 Feb
If you can pull either the drive gear...3 Mar
Mic6 AL plate comes cast and precision...8 Mar
You want a base that gets you to type...8 Mar
Geoffrey has it exactly right. It is...16 Mar
If you can read the pressure in the...19 Mar
I have the same cutter, so if you need...26 Mar
It's 8 revolutions per impression, and...27 Mar
You can use 2 or 4 rollers at a time....27 Mar
Can you take a picture of the motor...27 Mar
Google tells me that 550VAC three phase...27 Mar
Power = Voltage * Amperage. You will...28 Mar
It shouldn't be a problem. The shaft...3 Apr
That's a really good point. If you...3 Apr
I second what DickG said. Alan has a...4 Apr
Thomas, You can print your own...21 Apr
Had one followed the link, one might...8 May
Based on their other listings (and the...9 May
Looks like $110 will get you the shaft...13 May
They offered both one and two piece ink...28 May
@ Alan, Getting gears made is easy...29 May
While not exactly the same cutter, most...3 Jun
...16 Jun
I made a quick sketch of what I believe...28 Jun
The bolts on the old C&P's are not US...3 Jul
I bought one recently at Grainger on...8 Jul
What size is your press? For...9 Jul
Megill Flexible Pins are fantastic....11 Jul
I happened to see this today. I have...24 Sep
I would talk to Nelson Trucking. I...5 Nov
I have done this a couple times, and it...3 Feb
If it's motorized, just buy a new...6 May
Call Hern Ironworks. I bet theirs...13 May
That's clever. I've used the string...18 Aug