About Luke

image: Luke's picture
Recent content
TitleUpdated
What is this?8 May 13
C&P extra parts?25 Mar 13
Press ID? WA state4 Feb 13
C&P parts wanted3 Jan 13
Recent comments
Title ↑Date
@ Alan, Getting gears made is easy...29 May
Based on their other listings (and the...9 May
Call Hern Ironworks. I bet theirs...13 May
Can you take a picture of the motor...27 Mar
Eastside Saw does a great job. I...24 Jan
Evan, I was just curious about this...8 Feb
Geoffrey has it exactly right. It is...16 Mar
Google tells me that 550VAC three phase...27 Mar
Had one followed the link, one might...8 May
Has anyone simply bought 7/8" mic6 AL...7 Feb
...16 Jun
I bought one recently at Grainger on...8 Jul
I happened to see this today. I have...24 Sep
I have done this a couple times, and it...3 Feb
I have the same cutter, so if you need...26 Mar
I made a quick sketch of what I believe...28 Jun
I second what DickG said. Alan has a...4 Apr
I would talk to Nelson Trucking. I...5 Nov
If it's motorized, just buy a new...6 May
If you can pull either the drive gear...3 Mar
If you can read the pressure in the...19 Mar
It shouldn't be a problem. The shaft...3 Apr
It's 8 revolutions per impression, and...27 Mar
Looks like $110 will get you the shaft...13 May
Megill Flexible Pins are fantastic....11 Jul
Mic6 AL plate comes cast and precision...8 Mar
Power = Voltage * Amperage. You will...28 Mar
That's a really good point. If you...3 Apr
That's clever. I've used the string...18 Aug
The bolts on the old C&P's are not US...3 Jul
There's a rocker on ebay right...20 Feb
They offered both one and two piece ink...28 May
Thomas, You can print your own...21 Apr
What size is your press? For...9 Jul
While not exactly the same cutter, most...3 Jun
You can use 2 or 4 rollers at a time....27 Mar
You want a base that gets you to type...8 Mar