About petspo1

image: petspo1's picture
  • Member for 11 years 5 weeks.
  • Last access 35 weeks 6 days ago.
Recent content
TitleUpdated
Misc Letterpress Equipment13 Sep 21
Vandercook NO 1 Proof Press9 Jun 17
A New Use for Your Type24 Feb 17
Poorly Misuse of Letterpress Tools21 Oct 16
Arts and Crafts2 Mar 16
Model Press No 1 Question3 Feb 15
Recent comments
Title ↑Date
A picture of the space washer Peter12 Apr
A rider roller would definitely help...4 Jun
After Brandi's situation and the...8 Mar
After some thought, I think I have...4 Nov
Any chance the press is for sale?23 Sep
Any electrician should be able to help...24 Feb
Bob, My apologies but I am fresh out of...8 Mar
Brandi, All I did was offer you a...15 Apr
British Navy? I am assuming you are...9 Mar
By a Chase Gripper, Are you referring...8 Feb
Delay my last...........I guess the arm...9 Feb
emthree, that's it, no other response?...25 Feb
For Power - you do not have to have a...25 Mar
Gentleman, I would like to add a few...29 Nov
Geoffrey, Not too many people ( do it...7 Apr
Good eye Mr. Platen, That screw...22 Jun
Guys, I am still at awe. I am shocked...27 Oct
Here is a very informative link to...11 Apr
I agree with platenprinter. I think...1 Oct
I also had new shafts and pinions...8 Mar
I am interested as well!15 Oct
I am quite certain that the electrical...8 May
I apologize, typo on the Model...15 Feb
I believe the shaft is oscillating...12 Apr
I can appreciate Virgin Wood Type and...21 Oct
I don't know if I may be able to help...15 May
I have a Edison Mimeograph with tons of...9 May
I have a font of wood type that has the...1 Dec
I have seen end tables made with...22 Feb
I like that. I hope you don't mind if I...28 Feb
I love the link you shared. Quite...18 May
I understand pi'd type issues, I can...25 Feb
Isaac The ink disc pawl is installed...19 Jun
It has been a long time since I have...15 May
It is a Model, French Version - Model...3 Feb
It looks like the roller spring arm is...9 Feb
It would be much easier to contact Joe...30 Oct
Its VERY EXPENSIVE! Just...29 Oct
I'm interested to see if anyone else...9 Apr
John - That was one of the most...27 Oct