About Bruce cpd

image: Bruce cpd's picture
Recent content
TitleUpdated
letterpress operator in Landover, MD13 Nov 21
Blocking press 30 Dec 19
subject to tariffs5 Jul 18
kluge rider roller adjustment10 Aug 16
truck wear10 Jun 15
9/16 inch bearings16 Jul 14
compression springs3 Feb 14
Kluge rider roller26 Jul 13
gripper timing28 Jun 13
Recent comments
Title ↑Date
2 part epoxy forms a reasonably hard...2 Dec
A rider roller should fix ghosting if...30 Dec
Accurate exposure and washout times...20 Dec
Also once you deboss the sheet it will...8 Jul
Another problem you might encounter if...21 May
Another winkle bag! 2 color, hand fed...24 Dec
Are you reusing old packing? When you...2 Nov
Are you using your Kluge to print with...14 Oct
As mentioned above, for getting good...19 Feb
Assuming nothing is worn or broken then...11 May
At the begining of your post it sounded...13 Feb
Check the roller trucks for this kind...3 Oct
corbinw, Your pic looks to correspond...12 May
Corrosion is oxidation of the metal, so...18 Jun
Could someone have changed the trucks?...8 Nov
Couple of ideas. If you have to hold...9 Dec
Depending on the platemaker you may be...12 Feb
don't know what packing you use for...7 Mar
During the time that you have been...19 May
First examine the clean plate in good...28 Aug
From the enlarged picture, the ink...4 Jun
Good advice above. One other thing I...16 Oct
Gummistiefel Which printer model are...7 Aug
Have several kluges, models N and NA...23 Mar
Hello gracefuldesigns, There are alot...4 Jun
Hello sofiaprints, I'm not an...11 Mar
Helwig Carbon in the USA carries a...20 Apr
Here's a couple more. When using...14 Dec
Hey 2boysandadog, Making mag or copper...19 Dec
Hey Frederik, Your polymer comes with...14 Sep
Hey Hunter6, there's a video on Youtube...21 Jul
Hey iwillcreate, your best bet is...23 Apr
Hey platenpress, mine does not have...23 May
Hey thanks Mick for your comment. I...26 Jul
Hey thanks to your comment and a little...11 Jan
Hey that's good experimenting. I've...30 Sep
Hi thisdesignedthat, So I wasn’t...7 Mar
Hi 1crem1, another important point when...28 Jul
Hi Alex the top label especially shows...10 Dec
Hi Amanda, I'm not sure from your...15 Jan