About Arie Koelewyn

image: Arie Koelewyn's picture
  • Member for 6 years 26 weeks.
  • Last access 1 hour 47 minutes ago.
Recent content
TitleUpdated
Printshop sale and meeting of the Michigan...8 May 13
Johnson Type Foundry Philadelphia24 Jan 13
The Paper Airplane Press21 Oct 10
National Amateur Press Association21 Nov 06
Recent comments
Title ↑Date
0.918 inches is the desired height of...4 Apr
1. Not likely. At least not...24 May
30 wt non detergent oil is what I use....10 Aug
A 10x15 OS is about 1650 lbs., if I...11 Sep
A 3x5 image on an 5x8 Kelsey is...19 Jun
A 5x7 plate on a 6x10 press *and* deep...22 Apr
A C&P Craftsman is a heavier duty...4 Apr
A glass or marble slab.7 May
A Kelsey is capable of good work...it's...23 Feb
A laser printer will do a much better...2 Sep
A Poco #0 most likely. I believe these...7 May
A Poco #0 or a Vandercook #1 could, I...25 Jan
A rag damp with roller wash.7 Aug
A reasonable price is an agreement...27 Jul
A sturdier table? Metal or wood with...16 Jan
A treadle can be added if the flywheel...17 Mar
A treadle will make it easier to vary...2 Jul
A) Yes. Printing light on dark is...8 Mar
About 1/2 the thickness of the paper...18 Oct
According to another thread, this...12 Feb
Ah yes. That's not my press or my...24 Mar
Alan: Would you be willing to post a...2 Aug
Also measure the boxcar base and plate...14 Sep
Amalgamated Printers Association asks...30 Oct
An 8x12 C&P OS uses 4 cycles of the...10 Apr
An 8x12 will go through a standard...16 Dec
An acquaintance had a similar problem;...10 Aug
An easier solution may be to print it...29 Jan
An engine hoist capable of lifting 2000...6 Aug
Anaderoux: No picture, but it's...24 Jun
And if that's too complicated for you...21 Jul
And I'd disagree with Winking Cat. I...1 May
Another thing to check is the throw-off...15 Mar
Any platen press can be dangerous if...6 Sep
Archie5370: The B just means 8x12....20 May
As BillWhitley says, the drive pulleys...8 Jan
As long as it is lint-free. I use old...9 Mar
As Vrooooom says a floor jack is very...11 Oct
Asking a Kelsey to print anything close...4 Apr
B6361 should place it at the very end...12 Jun