Heidelberg platen drive belt
Anyone have the specs for a 10x15 platen drive belt I need to get a backup can’t read whats on the old one
Thanks
Mike
ffi |
fl |
5m |
4m |
’ |
k |
e |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
$ |
@ |
# |
Æ |
Π|
æ |
œ |
|||||
j |
b |
c |
d |
i |
s |
f |
g |
ff |
9 |
A |
B |
C |
D |
E |
F |
G |
||||||||||
? |
fi |
0 |
||||||||||||||||||||||||
H |
I |
K |
L |
M |
N |
O |
||||||||||||||||||||
 |
||||||||||||||||||||||||||
Mine reads Jason 2926V966. Not sure if that will correspond to any current belt spec though.
Mine reads, Dayco variable speed cog-belt #3226V903
Came from Don Black in Toronto
John
There is one on ebay: http://cgi.ebay.com/Jason-2926-V-966-Variable-Speed-Belt-2926V966-/30043...
which might be cheaper than getting it from Heidelberg or any of the other sources.
(instead of starting a new thread)
Has anybody had success with the third party belts? I’ve only used the Heidelberg belts made by Continental. They’re pretty worn and are extremely squeaky and worse at slow speeds.