Vandercook 219 AB P
My Vandercook 219 AB P will be here in less than a month. The press currently runs on 3-phase power, and I’m trying to figure out the best way to convert it for use in a space with standard single-phase electrical service.
From my research, I’ve found three possible options:
Phase Converter or VFD: Keep the original 3-phase motors and use a Variable Frequency Drive (VFD) or phase converter to operate the press on single-phase power.
Motor Replacement: Replace the original 3-phase motors with single-phase motors. The ink drum motor may be replaceable with a standard 110V motor.
Manual Conversion: Disconnect the powered carriage assembly and convert the press to manual operation, keeping only the ink drum motor powered. I do not want to do this.
Which option would you recommend for cost, reliability, and ease of use?

Screenshot 2026-11-18 at 1.35.56 PM.png
VFD would be my first choice.
Phase convertor would be a second choice.
Changing the motor would be my last option.
Why? VFD or convertor leave the machine “intact” as it was when brought to you. They’re not that hard to install, as long as you can find a supplier or electrician that can give you good information.
Changing parts on old machines can open a can of worms that leads indirections then end up being no fun.
Not saying it can’t be done or that you would definitely run into issues changing the motor. It already sounds like it could get complicated as there’s two motors?
duplicate post :-(