About Widmark

image: Widmark's picture
Recent content
TitleUpdated
C+P Pilot, 2 full type cabinets and many extras...8 May 23
Adjusting Challenge 305 Knife Gibs18 Nov 13
Lettra front and back different?13 Feb 13
Cleveland area rigger/help?17 Jan 13
Windmill vs. Craftsman 10x15 showdown18 Jul 12
Pilot vs 8 x 12 strength/quality question9 Mar 12
Glueing card-stock31 Jan 12
Vandercook Crescent issue...29 Dec 11
Laser compatible paper and ink9 Oct 11
Printing double sided on a Vandercook8 Sep 11
Recent comments
TitleDate ↑
just to elaborate on that. Whether you...13 Mar
I'm also new and can say that there are...23 Mar
Copies on Amazon and eBay are priced at...24 Mar
Thank you all for the very useful...9 Jul
The deep relief press isn't for making...24 Jul
There are a few dealers who sell wood...30 Aug
I've been thinking about this a lot...20 Sep
Can anybody recommend at micrometer? I...29 Sep
I've seen it done on a Pilot with...30 Sep
From what I've seen, people usually...4 Oct
for the top bail, do you have any more...18 Dec
This was previously discussed...5 Jan
Perhaps the secret is to find one with...5 Jan
I'm thinking maybe I should've done...26 Jan
So I was having a problem similar to...26 Jan
Problem with not having the feed table...12 Apr
I've ordered from them and spoken on...23 Apr
I have a similar problem on my Pilot...10 May
I thought my problem was my very old...10 May
I've always understood the conventional...10 May
I'm reviving this thread instead of...11 May
My understanding is that the soft...17 Jun
Agreed re: John. When you go, introduce...8 Jul
Just thought I'd revise this to see if...10 Aug
kill it how? My QCM trims fine, neat...12 Aug
just responded to your post on the...12 Aug
did you see...12 Aug
Vikki- regarding your comment here and...12 Aug
Legion Paper has already done some of...13 Sep
There's an option for laser printers...11 Oct
I've had a large library of old/public...21 Dec
When using unmounted plates on a...20 Jan
Absolutely. I've been twice. Lots of...1 Mar
You may want to start with the tape...5 Mar
I agree, it should work. I responded...22 Mar
If you sent a TIFF and a PDF you'd...23 Mar
Such as? This subject always comes up...23 Mar
That makes sense. Any way I can get a...9 Apr
The 10 x 15 manual says Net Weight...9 Apr
No, you answered my question, thanks!10 Apr