Adana typeface length - photopolymer

finally I bought a Adana Press! hs n2 :)
new rollers! all ok and ready to print!
but I have a problem! I don’t have any typeface,
i will work with photopolymer, and I needed to know the length of a type, from bottom to top printing area, because I will calculate the measures of the back plate.

if you could help me I would be very grateful!
any suggestion is welcome! :)

Log in to reply   3 replies so far

Type High = .918”

If you do not plan on purchasing a Boxcar base or equivalent, Happy Reading….

On a platen you will want to use/make a deep relief base with deep relief plates.

thanks! :)