About Paul Moxon

image: Paul Moxon's picture
Recent content
TitleUpdated
Line-O-Scribe Info13 Jan 18
Sigwalt and light table25 Jul 17
Yiddish and Hebrew linecasting featured on...28 Feb 15
The free Wedding Text fonts are taken10 Aug 10
Vandercook Maintenance: Portland OR27 Jan 10
Miller Holdtite23 Jan 10
Embossing Tool?20 Oct 09
Fameorshame Press18 Apr 08
Vandercookpress.info6 Nov 06
Recent comments
TitleDate ↓
The serial number indicates that is...9 Oct
All three editions of my book include...3 Aug
I agree with Thomas. This is how you...26 May
I don't see any fault it this....25 May
Hahaha. Best laugh I've had in a week....23 Mar
This press is galley bed height (.968")...30 Jan
Here's a pdf from page 928 of the 1923...2 Dec
I have other info on the 17 & 25 that I...23 Nov
The press-bed may be galley height...27 Aug
Hey Carl, I have nyliners. You have my...14 May
Southwest School of Art:...14 Jan
I concur with the previous comments but...1 Jan
Rick, I once owned this same face in...29 Nov
Edel Grotesk Bold Cond...26 Nov
I have posted a reply on Vanderblog:...22 Jul
A few years ago, I share some Poco info...22 May
In 1938, the Challenge-Poco series was...25 Apr
The roller diameter is 2.5". NA...17 Apr
It may be that the tab on the roller...6 Apr
rmiller021: That's a very generous...15 Jan
Thanks! This is helpful. My main...14 Jan
Robert, Fritz asked me to tell you...23 Dec
I agree with parallel_imp. Exceprt that...28 Sep
If you have lateral play on the cores...29 Aug
I will be passing near on my way to and...26 Aug
Don't forget to remove the hand crank.4 Jul
I found the website:...16 Jun
The value is hard to pin. But I say...3 Jun
This query is also posted on...13 Feb
According to the serial number table...31 Jan
This press is either a No. 20 (10-inch...11 Jan
I have commented on your post at...9 Jan
This is a later model Vandercook No.14....8 Jan
This is a Universal I. The serial...30 Nov
Dear Sue, Please remember that oil...29 Nov
A classic film. But you forgot about...13 Sep
Hold up! On the No. 4 the racks are...2 Sep
The ink drum motors on the Challenge...15 Jul
Your post title makes reference to a...2 Jul
The diameter is 3.0" the durometer is...20 Jun