Heidelberg Windmill - Removing the roller rails from the top

Hi, everyone!
Please, sorry if I ask something that was already answered, but, how do I remove the roller rails from the top? Glad if someone could help me or point a link.
Thank you in advance.

image: rails_0.jpg

rails_0.jpg

Log in to reply   1 reply so far

Remove the bolt T0689 if that makes no sense look at your manual ,if you dont have a manual you should go no further till you have studied it in detail .
It is called a bolt as many are on these machines but it is actually a sort of pin ,it is held in with a taper pin which is removed from the top side so has to be tapped out from beneath ,taper pins are placed by the easiest route for speedy manufacture ,there fore are removed via the most awkward route , its quite a small pin and i suspect yu will have to drill part way through from both sides aand drive the “bolt” out and then clean the stub out of the bolt .
It is not to be spoil sport that we keep telling everyone to get experts or competent people to do this work you can do a lot of damage if you dont know what you are doing , you may break parts that really there is no need to dis assemble at all , why are you trying to take this part off anyway ? You dont want to be painting this with off the shelf paint because your chemical cleaners will soon burn it off.