Anyone know the doorway width needed to get a uni3 through? Also any recommendations for an equipment mover in Conneticut would be greatly appreciated. Thanks!
With the furthest protrusions being the gripper pedal and the drive motor, 39 to 40 inches will do it. You can get some more room by taking the drive motor off the back. Let me know if you need more info on that!
Can’t tell you anything about the door width but we have used Light Rigging in years past with very good results.
Light Rigging Co.
80 E Main St
Middletown, CT 06457
Phone number (860) 347-0546
With the furthest protrusions being the gripper pedal and the drive motor, 39 to 40 inches will do it. You can get some more room by taking the drive motor off the back. Let me know if you need more info on that!
DGM
Thanks! Exactly what I needed