Hi,
I am looking to purchase type cabinets complete - in at least workable condition; and possibly any metal type preferably in Sydney, but consider elsewhere in Australia.... more
I have a Pilot Clone that was made by/for American Printing Equipment Co. and imported from West Germany. This is a naked press and I need a chase, trucks and rollers.... more
I’m looking for a Flywheel and a Gripper Bar for a C&P New Style 14” x 22” (1925 or 1926). Not positive about the year because I couldn’t find the... more
Hello, I’m looking for a tabletop press in good working condition for a reasonable price. Either a Chandler & Price Pilot or a Sigwalt (at least 6x9). If you have one... more
Looking for a Vandercook Press to be used by an artist. Hoping for a table top press that can take a 24 x 33 inch piece of paper that is inked by hand. Please let me know if you... more
Hi,
I’m looking for a Sigwalt 5x8 tabletop press that’s in good working condition. I’m also looking for metal type, rollers, chase, etc. that is required to... more
Hello! My husband and I are new printers in Nashville. We’ve been working on a Vandercook.
So far we’ve only done linoleum cuts. However, we have some projects... more
I am looking for a floor press, please kindly let me know if you or you know anyone is selling one.
Anywhere from British Columbia, Alberta, Washington, Oregon and Montana, etc.... more
I am looking for two letters from Elite Monogram 48pt.
I need two letter P (pictured) and one letter G. I would like to finish my set and will appreciate if you have spares!... more
Hi
I’m in need of a set of rubber rollers that sit in the inking apperatus, the sludge basin and a set of Distributor Rollers.
I’ve attached a picture of the... more
I am looking for a set of roller saddles (the saddle that holds two form rollers) for a C&P 10x15 that have the small diameter receiver on top for an oscillating rider roller... more
Hi folks, looking for a heidelberg windmill 13 x 18, for some reason I never seem those listed anywhere. Hope someone can help. Thanks in advance.
more
Our book/print area has an excelsior 11 x 16 hand press with it’s base. We need the two -piece chase and back plate with roller bearers and two rollers/or roller cores to... more
I’ve fallen in love! I’ve been researching table-top presses and I would love to have one. I would like a Sigwalt, but I am open to suggestions. My goal is to expand... more
I am looking for a working C&P Pilot letterpress. I am located in South Dakota, but am willing to travel quite a distance to pick up a press. Please contact me if you have one... more
Been in letterpress for almost two years and looking to become serious with a Vandercook. I’m hoping to stay under or around $2,000. If you’re getting rid of one for... more
Hello listers,
We’re looking for a long-style ink fountain (complete with mounting brackets) for an O.S. 8x12 C&P. Will also consider a long-style + pony combo as... more
A lock-up bar for a flat bed Challenge proofing press which is 15 1/4” wide. The press did not come with one. This is for a retrofit for a registration system. Thanks.
more
Seattle Letterpress Gallery now seeking artists to host Letterpress Art. Broadsides, small prints and other ephemera are up for review. For further information please inquire... more