Gorgeously detailed wire saddle stitcher. 27 1/2” table that can adjust for flat or saddle stitching.
Needs a new electrical cord; the current one is badly frayed.
Ready for... more
30 1/2” bed. Comes with 2 good blades. Beautiful beast. Perfect for small print shop. Dated 1906-7.
It will need to be partially disassembled to get out our doors, which we are... more
I bought this press in pieces, and got it about 90% restored. Set the platen height, do a bit of work on the throw off lever and ink disk, and you’ll have a big functioning... more
I have a beautiful, antique, 10x15” Chandler & Price style platen letterpress for sale. “Old style”, curved-spoke flywheel. Powered by motor. Press is... more
There are several letterpress items of interest in the Craigslist Seattle/Kitsap County listings should you be interested. They’ve been there for a while, but seem to be... more
Press repair, maintenance, adjustment, lessons on operating platen, or sheet-fed letterpresses. Experience with large and small presses. Advice freely given with the proviso... more
I am looking for a Potdevin gluer with a functioning hot glue capability preferably in the 15”, 18” or 21” sizes, but larger could work if the price is right.... more
Over 50 cutting dies all type high. Too numerous to describe here but range from one up to 8 up, squares and rectangles, some with round corners, circles, ovals, folders, tulip... more
Hamilton leading rack for sale, a handful of dividers included, as pictured. (If you need more dividers, it’d be easy to make more from some spare leading.) Measures... more
Artist in the pacific northwest, looking for a showcard proofing press for a classroom, would prefer the larger model, but I guess I”m not really sure what these tend to go... more
Chatwin Books is proud to announce the forthcoming publication of the 5th edition of Gerald Lange’s “Printing Digital Type on the Hand-Operated Flatbed Cylinder... more
Daredevil Furniture has grown, really HUGE. This set is ideal for working in a flatbed press to compose metal and wood type in circles, curves and... more
Large manual (not electric) lever-driven, guillotine-style paper trimmer with 34” blades. I have 5 extra blades.
Surface rust but the parts still move. Could use some... more
Selling a C&P 10x15 new style press.
The press is in good condition, hasn’t been used in a few years, but has been stored in a dry garage.
It has a motor that works, and is... more
Craftsmen Imperial 5x8” table top side lever pilot-style press. It is in good working condition with no breaks, cracks, or welds, and complete with all parts including the... more
Chandler & Price 10x15 Craftsman for sale for $2000.
It’s a heavier duty version of the typical New/Old style platen presses you see from C&P. Comes with two brand new... more
For sale Golding 1909 Jobber No. 8. 12” x 18”. Belt driven machine. Foot brake in photo is detached for safety. Ink fountain has been restored. All original... more
BARN is a community studio, and the Book Arts/Letterpress studio is in need of composing sticks in order to hold classes in our studio. We need up... more
Boxcar Base
9×12 deep relief base comes with printing apron and
Letterpress Printing, A Manual for Modern Fine Press Printers by Paul Maravelas.
Never used... more
Looking for a good home for our Morgans & Wilcox Washington Hand Press. We will provide this press without cost if all other related press items (type cases, cutters, ink... more
Kelsey Excelsior Mercury 6x10 Table Top Letterpress
Victor Arm (side lever)
Feedboard and Chase are included, just not pictured.
According to the serial number (pictured), this... more
