About Dick Holme

Recent comments

Title	Date ↑
hi, glad so much letter press...	10 Sep
Hi, the Press is a great piece of...	10 Sep
Use as little and as hard a packing as...	10 Sep
It is always a good idea to give the...	10 Sep
The Heidelberg is a great machine. It...	10 Sep
I'm not sure if there is a left to...	10 Sep
If I were going to test it, I would...	10 Sep
RE tympan use/re-use. No need change...	10 Sep
Yes Al, it set me thinking also. As...	11 Sep
I would be very careful with grippers...	11 Sep
Did you mean "pins" rather than...	11 Sep
Applies to C&Ps and similar, but not to...	11 Sep
meagan, here is a link to a manual that...	12 Sep
here is the...	12 Sep
Pacific Coast Engravers on 5960 Kester...	12 Sep
Good comment above. Also, only the...	12 Sep
Make-ready was used when an especially...	12 Sep
Hi, Al You probably know this but the...	12 Sep
Hi, this might help. Box Car Press has...	21 Sep
Perfect Bravo. Yes, drawing the shape...	21 Sep
My 2 cents on spaces and quads: The...	24 Sep
Hi, Ink the disk first to the desired...	24 Sep
A few additional thoughts and...	24 Sep
I was referring to cover/card stock...	27 Sep
I would take a piece of steel plate, of...	27 Sep
The press should be oiled daily before...	27 Sep
Hi, for gold and silver effects we used...	28 Sep
According to the manual: 3'11" wide...	28 Sep
For another way of going at it using...	28 Sep
Roller removal is not a normal...	1 Oct
Hi. A little more about oiling: •Oil...	1 Oct
You don't need to use the fountain....	1 Oct
Hi Meaghan, I would fix it. I've...	9 Oct
That is super. Yes...	13 Oct
Take a look at the Strathmore...	14 Oct
Take a look at the feed arm suction...	18 Oct
The most visible difference is that the...	23 Oct
Hi Meaghan, Great to see you are up...	6 Nov
Hi Meagan, All the comments are right...	14 Nov
An em quad is the type size squared. An...	19 Nov