About Metal Mermaid

image: Metal Mermaid's picture
  • Member for 14 years 5 days.
  • Last access 3 years 51 weeks ago.
Recent content
TitleUpdated
Vandercook 219 front "table"27 Sep 20
Book cover press12 Nov 12
Vandercook vacuum base27 Oct 12
Business card slitter and thick cover stock14 Oct 12
Mounting steel plates on wood15 Apr 12
Foil stamping on a Vandercook20 Feb 12
Photopolymer washout 20 Feb 12
Need a positive lockup bar for a Vandercook 219 AB22 Apr 11
Challenge Champion 305MC (1982?)17 Apr 11
Light bulb for a vandercook 219AB13 Apr 11
Recent comments
TitleDate ↓
It is, of course, a fly press too. It...12 Mar
It is a hand die stamping press for...11 Mar
I am looking to do this in short runs...12 Nov
Ok Dan. I'm coming to see that thing. I...27 Oct
I pad my cutter pretty well but there...18 Oct
I could and do cut them on my champion...14 Oct
Thank you all for your input. I would...4 Oct
I don't have an intaglio press and I do...15 Apr
I do this technique where I push the...15 Apr
@ Dan Very interesting about the...21 Feb
@winkingcat - thanks. my set up for...21 Feb
I know somebody who runs a windmill set...20 Feb
I wonder if I couldn't machine some...20 Feb
@parrallel_imp there is no fixed bar at...24 Apr
I am ideally looking for a 19". I am...23 Apr
great. I sent you my email. I really...22 Apr
Talked to the folks at Challenge and my...19 Apr
I often cut business cards 4 and 8 up...19 Apr
I found this device but it's a bit...18 Apr
I'm not talking about a programmable...17 Apr
Here's the socket13 Apr
Thanks for the advice. The way boxcar...21 Feb