About jnbirdhouse

image: jnbirdhouse's picture
  • The Birdhouse Press
Recent content
TitleUpdated
C and P parts available2 Oct 24
Cartoon Cuts1 Jan 20
Milling cutter for Rouse Miterer2 Jun 19
Hammond Ben Franklin TrimOSaw16 Apr 18
Restoration of Reliance Midget hand press13 Nov 15
Pantograph-router identification6 Mar 13
Recent comments
Title ↑Date
Attached are some photos of our...25 Apr
Frank, Thanks for all the photos....5 May
Frank, Thanks for the photos, they...27 Apr
From the accessories list, I found the...17 Apr
Greg S, Thanks for the insight from...15 Dec
I am getting ready to have a couple of...10 Feb
I had the same issue with our Hoe...4 Nov
I have a related but different issue...20 Dec
I have been successful in freeing the...19 Apr
I was looking at some old Challenge...17 May
In the first photo, isn’t the brass...23 Jul
Kim, As best as I can measure ours...3 Dec
parallel_imp, I removed the pin and...21 Apr
Photos of the bar17 Apr
Thanks, Frank. The photos would be...18 Apr
There is an article from the Guild of...4 Oct
These look similar to the four pieces...1 Oct
This seems to match Perpetual Calendar...15 Feb
We also suffered a broke shaft on a C&P...8 Aug
We encountered a similar issue while...29 Aug
We had a shaft break on our C&P 7x11...3 Feb
We have a C&P 7x11 press. I don't know...26 Feb
We have a different model of Kutrimmer...4 Oct
We have a few parts for an 8x12, if...12 Sep
We have a Hopkinson & Finsbury Albion...30 Oct
We recently purchased some Van Son inks...4 Nov
We replaced the motor on our #4 (s/n...21 Jun
We were able to do it on our OS 8x12...28 Feb
When we were refurbishing our...21 Oct
You could try...21 Apr
You might try a company by the name...7 Feb
You might try checking with this...27 Jan