Category: Troubleshooting the press
Later topic: Delivery Table Release on Heidelberg Windmill
Earlier topic: Windmill wont turn on

CP 10x15 os

We have CP 10x15 old series that we are rebuilding. I noticed before disassemble that when the rocker dropped down it went so far then dropped. I believe there is sopposed to be a roller of sorts that rides on the pin on the rocker arm that follows the cam inside the large gear. Since it is missing ,I’m not sure what size it needs to be. I can machine it to fit the pin then the cam opening but dimensions would be a lot easier.

Thanks
Mark

Log in to reply   3 replies so far

Mark,
I have newly manufactured lock rollers for $25. Do you have the stud? I might be able to find a used one.

John Horn

Mark,
I have newly manufactured lock rollers for $25. Do you have the stud? I might be able to find a used one.

John Horn

I haven’t looked at my post for a while.
John Horn thanks for your response.
I turned one that seems to be working great. It only took 2 tries. First time I had a few tight spots at different parts of the cam. Works great now. Thanks everyone.