About everythingisfine

image: everythingisfine's picture
Recent content
TitleUpdated
Printing with plates / pins.24 Jul 16
Online resources for paper buying23 Apr 16
Custom Magnesium Plates?14 Nov 15
how to print without gauge pins? // photopolymer...18 Oct 15
motor mount - C&P 10x1517 Aug 15
Treadle for C&P 10x1517 Aug 15
Polymer Plates & Their Finicky Printing.27 Jul 15
Painting a printing press20 Jun 15
Is It Bad To Keep Things Locked Up?15 Jun 15
Type Drawers4 Jun 15
Recent comments
TitleDate ↓
Thanks all for the multitude of...17 Nov
Here comes the rant; I genuinely...27 Oct
Wow! This is awesome. Thank you all for...20 Oct
Hi There! I encountered the same...15 Oct
I've never done edge painting, but I...4 Oct
Hi there; I've worked with Seattle...27 Sep
Again, Haven Press, your response is...29 Aug
I found good/inexpensive ones on...29 Aug
@Haven Press; Thanks SO MUCH for the...19 Aug
Hi Paul! I have this exact belt and...16 Aug
Curious if you have the specs for this?...11 Aug
Thanks everyone! I have a feeling it...28 Jul
My rollers are brand new, and this is...27 Jul
Hi Joshua! I run a small shop out of...27 Jul
Definitely too much ink is your...25 Jun
2 3/4 pts Pantone Yellow 6.2 1 7/8 pts...11 Jun
wow! these are beautiful. what a good...4 Jun
I think if anything is leaving marks on...4 Jun
VanSon for rubber based inks is THE...13 May
I have a non detergent 30w synthetic...10 May
NA Graphics is the way to go. I had 1...10 May
thank you! I'm going to try all these...8 May
Hey thanks everyone! I'm going to check...22 Apr
Thanks Theo, I'll check with a paper...20 Apr
Every ink disk I've seen has had that...14 Apr
Even if the serial number is covered by...24 Mar
depending on whether this is wood or...24 Mar
Thanks to Mac and Arie; I am hoping not...24 Mar
Hey Arie; The press is 6x4 feet (give...23 Mar
type or type face**1 Mar
Pat; Thanks so much! I sent Bonnie an...1 Mar
Hi! I work for Lynda Sherman of...25 Feb