About Richard Tautenhahn

image: Richard Tautenhahn's picture
  • Member for 17 years 14 weeks.
  • Last access 1 year 4 weeks ago.
Recent content
TitleUpdated
Heidelberg Windmill Manuals15 Dec 09
Richard Tautenhahn14 Mar 08
Recent comments
TitleDate ↓
assuming there is nothing else wrong...3 Oct
1. First measure the height of the...2 Oct
Have the base machined to .854"...28 Mar
Forget about ball color, they can be...18 Feb
Pull the pin out (the one that is about...18 Feb
The adjusting of the rails is on page...14 Dec
IMO, the Lutz is the best for a...7 Dec
The best quality IMO is this: 1. Run...15 Nov
Mr. Lange, interesting that when you...2 Sep
it could be the adjustment of the rod...2 Feb
Hello....Could you let me know where...30 Dec
That is silly, you can NOT get hairline...20 Dec
I forgot to mention an important...19 Dec
I didn't see what type of press you are...19 Dec
Another option is 16 gauge copper...19 Dec
The base you have is fine. You can also...19 Dec
When lifting a WM from the back be very...19 Dec
If your base or furniture or even the...17 Dec
Ball color doesn't matter because they...16 Dec
your first pass impression is causing a...16 Dec
On page 12 of the Windmill manual...15 Dec
The oil guns are available from...15 Dec
The oil should be Mobil DTE oil extra...15 Dec
Ball color doesn't mean anything for...15 Dec