About Brian Donnell

image: Brian Donnell's picture
Recent content
TitleUpdated
Use of dividers?3 Sep 09
Letterpress Tips20 Sep 08
Recent comments
TitleDate ↓
Well, I concluded that I couldn't cut...24 Mar
Hi, keeganmeegan-- What sheet size...10 Mar
It seems to me (O Memory!) I have seen...3 Mar
Is the press still locked up on...3 Mar
We die-cut on three small Heidelbergs...10 Feb
Sometimes an imperfect vacuum in the...6 Feb
Does this problem occur when you are...3 Feb
There's a picture of envelope...25 Jan
Maybe shingled tissues deep in the...26 Nov
Hi, bilcom printing-- If I...26 Nov
Hi, New@This, The front standard of...24 Nov
Hi, talkin-- Be a little careful...8 Nov
Another possibilty is a supplier of...31 Oct
Hi, Bob--I've heard that too, but still...12 Oct
I wonder about "cut to the chase".11 Oct
Hi, jfitz-- At our shop, we offer to...9 Oct
Hi, all-- There is a cam at the top...31 Aug
Hi, Ron and others-- Using brass...30 Jul
Hi, Marlaine-- Check the classified...29 Jul
Hi, Attila V-- Ordinarily, two kinds...28 Jul
Hi, casmit-- I think the vertical is...24 Jul
Hi, goomis-- I've had the...17 Jul
I remember seeing a trick using...30 Jun
Those little Haagen-daz (sp?) single...29 Jun
Hi, Peter and Parallel-- A few...27 Jun
Hi, Marcelo-- Ron's "work-and-whirl"...15 Jun
Hi, Marcelo-- Yes, I think you are...14 Jun
If composed with spacebands that are...7 Jun
Hi, Joshua-- We've had customers...20 May
Hi, all-- I used 1, 1...13 May
Saw a mini-blast furnace once--made out...10 May
Hi, all-- FWIW, I once ruined a form...9 May
Hi, all-- In our shop, we use three...9 May
Hi, all-- For what it's worth, I...29 Mar
Hi, Kobes-- In general, the...22 Mar
Hi, weselli-- Portland has an active...16 Mar
Hi, lindsay-- I can't really make...15 Mar
Hi, Tyler and parallel_imp-- Maybe I...7 Feb
Hi, Tyler-- You could try printing...6 Feb
Hi, Tyler-- You can try several...6 Feb