About dredaker

image: dredaker's picture
Recent content
TitleUpdated
Congratulations20 Feb 08
bearing rails7 Jan 07
advertizing clip art13 Dec 06
Recent comments
TitleDate ↓
snapsize, I have pulled the cam off a...1 Apr
Here are two links to open source 3D...5 Feb
Paul, I don't think I have a market...23 Dec
Paul, The copy wright symbol appears...23 Dec
Fool proof I misstated what I...23 Dec
Bossard, It looks like the stereotype...23 Dec
Here is a link to pictures of a...18 Apr
Cliff, I do some stereotype casting...5 Feb
A better approach might to get the...5 Jan
Mitutoyo, Starrett, Brown & Sharpe-...2 Jan
pilgrimpress, As a young machinist I...1 Jan
And there is the other side of the...20 Dec
vlt0014 Yes you can replace the crank...11 Aug
Taylor The part can be welded. the...18 Jul
ericrox I use 1/8 inch hot rolled...15 Sep
* dredaker * on 29 Jan 09...24 Aug
Hello, Someone from a museum New...15 Sep
I cast stereotypes. If you are not...21 Aug
You might check out the VFD VARIABLE...13 Aug
With all the parts there a good welding...12 May
I do not know much about soda blasting...4 Apr
Dose this include discussion on the...19 Feb
I don't know where you are and the...16 Feb
A less flammable option is to use heat...11 Feb
I have removed a cam from a old style 9...29 Jan
I don't know the market in the Bay Area...27 Jan
try don...26 Dec
...13 Nov
I have in one of my shops a precision...11 Nov
I saw this on craigslist Denver might...13 Oct
Upper feed table is 12" X 15" Lower...29 Sep
One thing that needs to be said when...23 Sep
Julie A good fabricator with...21 Jul
Bern , It is a mater of perspective...3 Jun
image 33 is a stereotype caster used...31 May
Jim, I run a machine shop and that...1 Apr
Jim, Was that $1000.00 for all the...28 Mar
Calvert , Galley Gab shut down first...24 Feb
If i were going to use the press as is...15 Dec
I run and have run a welding and...15 Dec