About duncapher

image: duncapher's picture
  • Ridge & Furrow
  • Member for 15 years 3 weeks.
  • Last access 9 years 20 weeks ago.
Recent content
TitleUpdated
Heidelberg: bent gripper, hidden oil ports23 Jan 16
Trouble with grippers on 10x15 Heidelberg...15 Dec 15
Cleaning Heidelberg filter15 Feb 14
Rust-Oleum on a Heidelberg Platen?15 Feb 14
Diecutting on Heidelberg 10x1531 Jan 14
Oil points on Heidelberg windmill30 Jan 14
Heidelberg issue - possibility air flow related30 Jan 14
Heidelberg windmill machinery care12 Jan 14
Brown Ink15 Jan 12
Inking issues, cold weather?7 Dec 11
Recent comments
TitleDate ↓
Well, ebay has a product available...18 Dec
Thanks for the all the information...18 Dec
.012" is awfully thin. Isn't that...18 Dec
Frank, Thanks a lot. A friend of...18 Dec
Hey everyone, thanks for the quick and...17 Dec
Thanks Peter. This exactly the kind of...15 Feb
I browsed some older threads and found...31 Jan
Thanks Brad, I was familiar with the...31 Jan
Whipping too hard - would that be...30 Jan
Thanks for the input. The paper was...30 Jan
Yes, I'm sorry, I meant the end of the...8 Dec
Thanks for the advice, everyone. Just...7 Dec
Many thanks. Law Italic is a good one...8 Sep
I'm in North Mississippi - there is a...8 Sep
Here are the images.8 Sep
Cool, thanks everyone. I'll assume that...8 Sep
I am not using guides. I'm not very...7 Sep
Well, I fixed it, but I couldn't find...12 Jan
Thanks.12 Jan
According to the manual, I either need...12 Jan
Thanks, I'll give it a shot - and refer...1 Jan