About pilgrimpress

image: pilgrimpress's picture
  • Member for 14 years 43 weeks.
  • Last access 8 years 36 weeks ago.
Recent content
TitleUpdated
Letterpress Stuff Photo28 Mar 12
Advance Paper Cutter Info Video3 Mar 12
Franklin Gordon short video23 Feb 12
Type high or no type high1 Jan 12
Ink roller images30 Dec 11
In trouble I think30 Dec 11
Paper dampening29 Dec 11
M E R R Y C H R I S T M A S and Thanks!24 Dec 11
Any Experience WIth Cheap Lasers???22 Dec 11
Reddington counter18 Dec 11
Recent comments
TitleDate ↓
Yes a lack indeed!29 Mar
its actually the door opening, I agree...28 Mar
Yes so am I, I would like to see...1 Mar
I am looking for a laser, what brand do...29 Feb
Well it is, you push it forward to...23 Feb
Friend I am glad you're ok, very glad...4 Jan
Good if it went for the opening bid...4 Jan
I bought an older advance from bindery...1 Jan
Thanks guys! Who makes a good one?1 Jan
Thanks all there is a wealth of info...30 Dec
In my very limited knowledge that's not...29 Dec
Call bindery tools, they have old...19 Dec
what is the price of copper vs mag per...18 Dec
this is interesting because I smashed a...18 Dec
Give Dustin a call at Bindery, they are...16 Dec
I tried using a heater about an hour...13 Dec
I'm a newbie, but I have been keeping...7 Dec
The Frisket Worked! But towards the end...7 Dec
It's mounted on wood block, not sure...5 Dec
Dick you may have it! My form is 4x6. I...4 Dec
It seems though that the rail taping is...28 Nov
Thanks guys! I figured the spokes had...27 Nov
Thanks Dave, I remember your laser...27 Nov
There is a hole dead center of the face...20 Nov
I am using at the advice of a fellow...19 Nov
Thank you! 18 Nov
It could be a repro, but I think it's...15 Nov
The two cuts together measured around...15 Nov
Where does one get a rubber blanket for...15 Nov
Didnt seem to be warped at all. It was...15 Nov
Hi The paper was just standard note...14 Nov
LOL Dick! Actually the seller was...10 Nov
As someone who just bought a...10 Nov
You know whats annoying is that in...9 Nov
Thanks Dick! I wouldn't go that far...7 Nov
Thanks to all! I will post a pic of my...6 Nov
On old printer who checked it for me...5 Nov
That gives me something to consider......5 Nov
I tried tonight with putting a magazine...5 Nov
Thank you all !4 Nov