About Printing Penguin

image: Printing Penguin's picture
  • Member for 13 years 3 weeks.
  • Last access 2 years 30 weeks ago.
Recent content
TitleUpdated
Van Son EASY STREET in UK4 Mar 22
Best Heidelberg Rollers20 Apr 12
New Heidelberg Rollers UK20 Apr 12
Heidelberg Platen/Windmill Motor HELP!8 Apr 12
Pre Mixed Pantone Inks6 Mar 12
Corner Rounder22 Feb 12
Heidelberg doesn't stop 18 Feb 12
Heidelberg Motor26 Nov 11
Die Cutting suppliers in UK21 Nov 11
Polymer plates disintigrating11 Nov 11
Recent comments
TitleDate ↓
Have only just read about this sad...19 Jun
The same happens here too, but you...9 May
Hi Kevin. It's still working, although...8 May
as Alan states, use an electrcian,.21 Apr
Yes, makes sense, although the...20 Apr
Hi, I fitted a new motor on my...20 Apr
...20 Apr
Is it similar to this one I stubled...20 Apr
I'll try the ''2 colour'' method...17 Apr
search the forums for tips on ;printing...17 Apr
wowzers, would be interested to see...16 Apr
If you can hear it then there's tooo...12 Apr
Sounds nearly like mine, yours is a...11 Apr
New motor works a dream, fingers...11 Apr
Hi John, Thanks for the heads up, I've...10 Apr
I'll pop Mr Senior and email, would...9 Apr
Hi Mikefrommontana, Thanks for...8 Apr
I have just fond the following info...8 Apr
Van Son do a gold. Someone here gave a...7 Mar
Problem sorted, thanks everyone...29 Feb
another tip, if you have a spare...20 Feb
3 times20 Feb
I20 Feb
Posted20 Feb
welcome to my world of agony....20 Feb
I cant check until tomorrow. What would...19 Feb
ah, Is this quite simple?18 Feb
............The Maltese Cross, a...9 Feb
Please please please read the manual....13 Dec
pair of grips, one on each nut and push...11 Dec
I hate to be an annoying, but you...10 Dec
I found the whole process pointless. I...28 Nov
What weight is the paper? Youll have no...24 Nov
Guys, thanks for the reply, but I have...12 Nov
problem solved, deep relief plates made...8 Nov
Hi, I'm doing everything normally...5 Nov
Well then, I'll shut up.4 Nov
are you sure it's from here, maybe she...4 Nov
I want to remove it to give it and the...17 Oct
haven't tried die cutting before, and...17 Oct