About rziesing

image: rziesing's picture
Recent content
TitleUpdated
Heidelberg Tiegel Taper Pin Removal30 Nov 17
Windmill doesn't suck (enough)29 Nov 17
Danagraf Film Processor8 Feb 15
NA Graphics?26 Jul 13
sticky green PVC to hold PP plates on washout31 Jan 12
Lutz hot foil for Windmill6 Dec 11
Mixing Inks Accurately28 Nov 11
Used Platemaker19 Oct 11
Photopolymer Platemaker- new to market14 Oct 11
Pantone Orange 021- rubber based ink28 Apr 11
Recent comments
TitleDate ↓
10 x 15- loosen the five bolts arranged...29 Apr
All of that said--Lettra is no longer...15 Jan
so you are advising a large mass with a...30 Nov
maple is a good option, being extremely...30 Nov
swapped pumps, now feeds properly with...30 Nov
prior owner(s) destroyed most of the...30 Nov
Not a vane pump. Piston with rings in a...29 Nov
I once saw a press where the left paper...29 Nov
This machine has finally died....1 Nov
Thanks. btw......I didn't mean to...26 Jul
Thank you Fritz7 Dec
Ok, I was attempting to offer some...28 Nov
I was more pointing out that you could...28 Nov
Ya, I got a price from them, but their...19 Oct
If you can find the right paper, you...18 Oct
My windmill runs a Dayton 6K393R in...9 Sep
Are you sure the feed stack is in the...9 Sep
I've run the blank (precut) coasters...8 Sep
I used a drill press to make a groove...20 Aug
Found blankets from Roger at J. Thomas...26 Jan
Just had a conversation with Roger at...26 Jan
Great explanation, Platen Man. Thank...25 Jan
Ya the makeready is what I spent most...25 Jan
You need a way to output film to use in...25 Jan
Good idea except that I have 140 to do...25 Jan
Thanks Bern11 Mar
I think it would be far cheaper to just...10 Mar
put the paper in a nice 50-60% humidity...9 Mar
I know this thread is dead, but I'm...16 Jul
just buy direct from van soy- their...16 Jul
Legion Paper in NYC sells wholesale...1 Mar
"And are you the sort of person that...31 Aug
When I bought my Heidelberg, I thought...31 Aug
thanks...i think i am trying to mix too...21 Aug
Sal, Thanks for your comments...21 Aug