About Winfred Reed

image: Winfred Reed's picture
Recent content
TitleUpdated
Scam4 Jun 23
Pad backs - Chipboard8 Mar 22
Kluge Press Feeders.12 Feb 21
Business Card Die8 Jan 21
Kingsley Foil Stamper-Help!12 Jul 18
Tympan23 Jan 13
Recent comments
TitleDate ↓
Thank you Fritz. He did contact me and...6 Jun
Use Van Son Tough Tex Ink. Dries by...4 Jun
Disconnect the Throw Off Saddle arm....17 Apr
Thanks everyone. I'm using 30 point....11 Mar
James, thanks so much for the grid...18 Dec
moe_szys1ak If and when you do the 14...15 Dec
Teikaut, how did things go with your...4 Dec
So sorry for your loss. He will be...15 Nov
Wish I was 20 years old again. Hope...28 Oct
Glad all is o.k. Thanks Fritz. 9 Apr
Appreciate all the tips. Anyone else? 17 Feb
Thanks Scott. Hope others will chime in.15 Feb
Thanks Ericm. Appreciate it. 13 Feb
Ericm here ya go. Meant to send off...13 Feb
Mike, sounds good. Thanks for the...8 Jan
What's the purpose? I've always put...8 Jan
NPI On the feeder. All it needs to do...8 Jan
Sounds good Mike. I was thinking 12 up...8 Jan
Here's some. Get it, it...4 Jan
Throw them in the garbage. Order new...26 Sep
Nice job Arie. I too would...27 May
Nice work. Tell us a little about...9 Mar
12. Call things by their correct name....7 Jan
Mike Moore any chance of posting a pdf...12 Nov
So glad you made it back Fritz. A...5 Oct
Prayers going up for Fritz and the...17 Jul
Your Nu-Arc 26-1K uses a 1000 watt...27 Feb
Try...12 Feb
Try Fritz at N.A. Graphics....21 Jan
Check the corners of the bed of the...18 Jan
idk Appears your disc pawl has snapped...29 Oct
Measure inside the chase. If it...3 Oct
Thanks a lot Dick. My address...22 Jun
DickG where could a person find a...21 Jun
I turn my stuck cans upside down in a...25 Feb
What a mess. Winfred Reed Black...20 Jan
Very nice! 1 Jan
It won't let me watch the movie since...10 Nov
Keep in mind the motors that came with...9 Sep
Congratulations John! Winfred...30 May