About uthmod

image: uthmod's picture
Recent content
TitleUpdated
Making Acrylic / Plexiglas polymer-mounting base17 Jan 18
Kelsey Pressbed thickness and dimensions26 Apr 16
Windmill gripper travel adjustment28 Nov 13
Heidelberg windmill infeed jammed parts28 Nov 13
Windmill weak air blast and suction28 Nov 13
Windmill gripper tearing packing when stopped at...13 Apr 13
How exactly step by step should I install the...17 Dec 12
Dimension or CAD drawing of 10x15 Windmill rider...20 Nov 12
Adana 8x5 roller kinked5 Nov 12
Who had tried or made something like this...17 Jun 12
Recent comments
TitleDate ↓
Thanks for the tip, Henry! I was...22 Jan
It is also possible that the gripper...26 Apr
Disasemble some parts of the pump and...12 Apr
Chinese grippers might not be using...12 Apr
Once I helped fixed a press with...12 Apr
It's probably broken in the insides....12 Apr
I know a hong kong printing company...3 Jan
Thanks phase4 for your suggestion. I...28 Nov
Thanks for the advise. I guess now I...15 Apr
Do you have a even and stable packing?...8 Apr
May I know why they don't use polymer?...5 Apr
Hong Kong here. I heard there is a...24 Mar
I use a few pieces of machined and...11 Mar
So between the form rollers that...10 Jan
Thanks Dace for your generous offer....9 Jan
Shall I wax the edge with bee wax...9 Jan
I am with dickg. Clean the rails and...28 Dec
Anyone has extra of the above stated...19 Dec
Brad, I confirmed with the ebay shop...18 Dec
but I couldn't even fit the part into...17 Dec
Got a frame from a video on boxcar...17 Dec
Thanks for the suggestions~ I will look...20 Nov
Turn out that I have to loosen the...7 Nov
Hi Mr. Luckhurst! Thanks for being the...5 Nov
They have a wooden handle version. I...17 Jun
As a second thought, if the photos in...16 Jun
Make sense~ Now I am like the happiest...15 Jun
Got it. It's the inking that affects...13 Jun
Similar situation here! Shame on the...12 Jun
One more note. Upon inspection the tube...12 Jun
Some postscript. Reading trouble...12 Jun
Hi everyone. This is my first post and...12 Jun
Thanks for your prompt reply, but the...6 Jun