I’m selling a composing table (furniture not included and there is quite a bit of rust) for $350. The dimensions are as follows: 4’-3” x 3’-3” x 3’-6” high... more
Fuchs and Lang printing press. I have 2 so I’m just looking to get rid of the one pictured. It’s disassembled right now from when it was last moved and will make it easier to... more
Time to clean out the garage.
Buyer must take all (=
Asking $1500
The items I’m selling are as follows///
- 8x12 C&P old style treadle powered press
- Manual... more
update: sold. Peerless platen press fully restored, 6 cabinets full of type, furniture and all the small items needed to have a print shop that leans to the book arts.... more
Hamilton Type Cabinet with at least 20 mixed cases all filled with type. All the cases fit the cabinet. The cabinet should measure about 22.5” x 35.5” wide and 41” tall... more
New Style 10X15 C&P Moves some by hand, has chase and roller cores. Originally planned to restore, but don’t have the time and now need the space.
Under Tarp in carport... more
Free Letterpress stuff. metal type and printing dies. galley cabinets. Must go are will have to throw away. some stuff is up too,80 + years old. got old table top press. please... more
Hamilton 15 drawer flat files
Hamilton adjustable height tilt top wood drafting table with desk base.
C+P 10x15” treadle press
Vandercook No.099 proof... more
Standard Boxcar Base 13x19 inches $500
Boxcar base in excellent condition purchased fall 2020. $500 plus cost of shipping/packing to your destination... more
I’ve got a 1909 C&P 10x15—plenty of chases, quoins, etc. Treadle-driven. Two furniture cases, 2 closed metal Hamilton cabinets w/ cases, two generic open cabinets w/... more
10 x 15 1965 Redball. Excellent condition with many new parts and rollers. The press comes with a chase, 2 Challenge Hi-speed Quoins (9” & 7.5”). Currently under... more
Selling complete shop. First up double metal cabinet with type and spacing material. Email for more photos for type identifications. All is foundry type in good shape. If... more
I have a Wimble Aust. type/furniture galley. There are four trays full of furniture, spacers mainly(some quads). Also I have various items of interest to letterpress... more
1958 Heidelberg Windmill. I’m looking to sell this press as I haven’t been using it and want to make room for other equipment in my garage print shop. Last regularly... more
Selling my Vandercook #3 Letterpress that has new rollers with my Challenge 193 Cutter. The cutter has a new motor and xtra blade and is 220 single phase. Selling together.... more
Start your own letterpress business! I had the best intentions, but woodworking is more my style. Selling all as one lot $4,250.
Beautifully restored Daughaday tabletop printing... more
RSS feed
.thumbnail.jpg "Zoom image")
