Setting up my printing operation so looking for a full 14pt fount (at least 16A/74a roman, plus italic) of a classic serif body face - e.g. Garamond, Benbo, Centaur, Baskerville... more
Looking for any parts for a Fairchild Teletypesetter Perforator. These produced the punched paper tape that operated Intertype line casting machines. Need parts for the punch... more
Once again it is time for the yearly operating display of the Model G4 Intertype at Field Days of the Past near Richmond, Va. Sept 15 thru 17. Also will be operating two hand... more
I have several empty type cabinets and one with type for sale.
Hamilton 2/3 case, all all matching drawers. Good condition - Empty - $700
Metal Hamilton California cabinet, some... more
Serial #28614 (built in 1969), the press weighs 1,700 pounds, accommodates a sheet size of 24x26 inches, and runs on 3-phase power. It has a galley-height bed with galley plate... more
We are a well-established small publisher and Los Angeles gallery currently expanding into creating smaller-edition (100-300 qty) letterpress books with die cutting, tipped-in... more
Proof press model number dates 1934. Mint condition, several letters in different fonts. From what I gather it belonged to publix supermarket. Only in on letters is publix green... more
Looking for the collar that attaches the heating unit to the press of a Kensol K52 Foil Stamp. It is for an educational non-profit that teaches letterpress and book arts. Please... more
I am looking for a tabletop guillotine cutter or smaller floor model. I am located on the North Shore of Massachusetts and willing to pick-up within 2 hours or so. Must be in good... more
I have some chases that I have picked up here and there and its time they find new homes.
Asking $25 each on the 15 x 10 and $35 each on the 12 x 18 and $100 on the... more
Miehle Vertical V50X, C and P 8 x 10 Newstyle press, C and P Guillotine hand cutter, wooden type bank with many distributed fonts. Prefer to sell all at once. Will consider... more
Prouty letterpress for sale. The rollers need new rubber. Includes the chase. It came with a motor but not sure if that works. I also have some metal type, furniture and furniture... more
Calling all artists, healers, and activists:
Open Windows Cooperative is a print shop/bindery dedicated to open sharing of ideas, skills, and support. Located in Yosemite Place in... more
Hi! My name is Jordan and I’m launching a new letterpress podcast called “Letterpress Digest”. It’ll be on iTunes, Stitcher, and other podcasting platforms... more
My Craftsman 14-1/2 x 22 Chandler & Price press is for sale.
In production until the mid 1960s, this was the largest platen press manufactured by C&P and was widely... more
Hi everyone,
I have a Heidelberg Press and Challenge Advance paper cutter with two additional blades as well as two cabinets of type available for sale
I have brand... more
Hello! I am in search of a Heidelberg Windmill in the midwest. I have run them for a few years and am excited to hopefully find one of my own!
Thank you.
more
Heidelberg Windmill 10x15 platen press. Red ball dates to 1960. Prints extremely well. Very tight registration. Relatively (1 year) new form rollers. Ink train works well. Press... more