About andykeck

image: andykeck's picture
Recent content
TitleUpdated
Intertype Model C and related gear31 Mar 14
Equipment moving help in the Portland, OR area14 Jun 07
Recent comments
TitleDate ↓
I used to babysit a 330 back in the...25 Jun
For the record, I had a not too...16 Feb
I did my part! I gave my Kluge to...7 May
I count nine inking rollers. Just did a...28 Feb
That's the same kit I bought a couple...11 Dec
As the owner of a nearly identical...11 Oct
My Kluge is old enough that there are...1 Jun
It was just fine. As I recall it's just...31 May
I got mine from Dale (dcshop1001 on...30 May
'Steam' rollers haven't been steam...27 May
>Good advice from Inky, after all his...7 May
I'm in the same boat as Lead Graffiti....7 May
Blatchford and Dutch Boy both were...12 Apr
There are Kluge manuals at...28 Feb
I got my pump rebuild kit from Dale...24 Feb
> As andykeck said, metallic ink will...25 Jan
IMO, on uncoated stocks, metallic ink...24 Jan
To lever up the press to get rollers or...24 Jan
To lever up the press to get rollers or...24 Jan
For what it's worth, the practice of...20 Jan
>My typography instructor from RIT is...6 Jan
Let's see. First, I'd look _real hard_...14 Nov
>My understanding is that monotype type...6 Nov
Are you down in Burien? If so, I've...16 Apr
I'm with modernman here. A well...22 Mar
Any case anyone else stumbles across...6 Mar
Yeah, you'll want a rebuild kit like...11 Feb
According to this...15 Dec
I always just wear coveralls....17 Oct
Sorry. It's been 17 years since I last...6 Oct
It's been a long time since I used to...6 Oct
It's been a long time since I used to...6 Oct
Do you have access to a densitometer? I...27 Dec
>...that sells original manuals for the...17 Sep
Well, I guess I have a project for this...2 Dec
I got sidetracked by some stuff that...28 Nov
I haven't bought the kit yet as the...7 Nov
Rebuild kits are often available on...7 Nov
Here's a link to a few photos of the...10 Aug
I'll take some photos this evening and...10 Aug